battery connections

BlackHornet · 07-08-2009, 07:05 PM

hey guys, i was watching that electric drag racing video and noticed that the guy didnt use cables to connect his batteries...but used copper plates that were bent to fit to go to from terminal to terminal. would that be worth doing? im going to be running 2 gauge wires anyways and a 650 amp controller. would going with the plates like he did be better? i guess what really matters is what would the the pros and cons would be

Nate · 07-08-2009, 10:00 PM

Pros: Excellent amp handling capability.
Cons: If batteries are too close then expand with age they can bend battery posts.
If his bend was to give flex then the con rule goes away.

BlackHornet · 07-08-2009, 10:04 PM

would i notice a difference in the bars over the 2 gauge cables when running 650 amp controller?

Nate · 07-08-2009, 10:26 PM

Probably not.

BlackHornet · 07-08-2009, 10:26 PM

haha ok, sounds good then. thanks

buscopat · 07-09-2009, 09:33 PM

There is a product called Eriflex from Erico tat is a flat insulated copper that can be used as a cable substitute.
This product has a much better current carrying capabilities.
I think the down fall to this is that as the chasis flexes and the batteries move, the bars are going to be stressed.

07-08-2009, 07:05 PM	#1
BlackHornet Gone Wild Join Date: Oct 2008 Location: Austin/Willis, Texas Posts: 632	battery connections hey guys, i was watching that electric drag racing video and noticed that the guy didnt use cables to connect his batteries...but used copper plates that were bent to fit to go to from terminal to terminal. would that be worth doing? im going to be running 2 gauge wires anyways and a 650 amp controller. would going with the plates like he did be better? i guess what really matters is what would the the pros and cons would be

07-08-2009, 10:00 PM	#2
Nate Gone Wild Join Date: Dec 2006 Posts: 564	Re: battery connections Pros: Excellent amp handling capability. Cons: If batteries are too close then expand with age they can bend battery posts. If his bend was to give flex then the con rule goes away.
Nate Gone Wild Join Date: Dec 2006 Posts: 564

07-08-2009, 10:04 PM	#3
BlackHornet Gone Wild Join Date: Oct 2008 Location: Austin/Willis, Texas Posts: 632	Re: battery connections would i notice a difference in the bars over the 2 gauge cables when running 650 amp controller?

07-08-2009, 10:26 PM	#4
Nate Gone Wild Join Date: Dec 2006 Posts: 564	Re: battery connections Probably not.
Nate Gone Wild Join Date: Dec 2006 Posts: 564

07-08-2009, 10:26 PM	#5
BlackHornet Gone Wild Join Date: Oct 2008 Location: Austin/Willis, Texas Posts: 632	Re: battery connections haha ok, sounds good then. thanks

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-09-2009, 09:33 PM	#6
buscopat Gone Crazy Join Date: Dec 2008 Location: Churubusco, IN Posts: 1,989	Re: battery connections There is a product called Eriflex from Erico tat is a flat insulated copper that can be used as a cable substitute. This product has a much better current carrying capabilities. I think the down fall to this is that as the chasis flexes and the batteries move, the bars are going to be stressed.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
battery connections	Design Center
Can I replace my 12v Battery with an AUTOMOTIVE Battery? (2005 Club Car Precedent)	Electric Club Car
36v Hitachi Motor Connections	Electric Club Car
Electric EZ Go battery connections	Electric EZGO