|
Extreme DC! Extreme Electric Golf Carts! |
|
Thread Tools | Display Modes |
11-17-2010, 01:52 PM | #1 |
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Alltrax programinng for the complete idiot
Just sitting here waiting for the little brown truck and my DCX500,and com kit.I have read every thread I could find on Alltrax programing and I sure hope a tech challenged idiot like me can pull it off.Seemed like all the threads that I read the OP was lost,had problems,needed help then beamed up.Never another word.Wish Ups would just get here!!!Dave
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-17-2010, 01:56 PM | #2 |
Gone Wild
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
|
Re: Alltrax programinng for the complete idiot
Have programmed several, PM me and let me know what questions you have.
Might also see this thread: http://www.buggiesgonewild.com/elect...ontroller.html |
11-17-2010, 07:03 PM | #3 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Alltrax programinng for the complete idiot
Its really pretty simple once you do it once. Just ask if you have any questions.
|
11-18-2010, 07:16 AM | #4 |
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: Alltrax programinng for the complete idiot
I knew it,just the way s--t goes,controller in hand,no instructions,yea I know they are all on Alltrax web site,the 23 pin adaptor was included but none of the wires that were to be cut,spliced and relocated are there.I just need to read and go step by step.It would help if I didn't have CRS..Dave
|
11-18-2010, 09:29 AM | #5 |
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: Alltrax programinng for the complete idiot
By jove I believe I've done it!!!!!Have some questions if ya'll wouldn't mind???
Map setting-I left as preset-4,what happens up or down??? Under-Over-I left as preset-24-57.1 what changes with these settings? Throttle up-dn,Ileft at 5 on both,as I understand it the higher the number the harder the leave?? Had to change throttle sensor from CC 5k-0 to 0-5k my CC is 0-5 pot regen II.just wondered why the avaliable settings included CC 5k-0 and a plain 5k-0? Throttle responce:default was Custom.changed to linear,but do not know what any of them mean or do. If there is somewhere I can read this and answer my own questions just point me and I will not be a pain in the azz.I have been all over alltrax site and haven't seen.Thanx Dave |
11-18-2010, 09:48 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax programinng for the complete idiot
99 % of all programmable controllers are run on factory default settings. Without a performance complaint. Default setting gives 100% output. You can screw stuff up in there if you do not know what you are doing.
When you downloaded the software there was a tutorial available. I have read it start to finish many times, it explains every aspect of each adjustment much better than any of us can. Good Luck. |
11-18-2010, 10:07 AM | #7 |
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: Alltrax programinng for the complete idiot
Thanx Scotty,I didn,t see the tutorial but I will go back and look again.That is the point,Iwant to know what and why.Dave
|
11-18-2010, 10:11 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax programinng for the complete idiot
The tutorial is the way to go.
|
11-20-2010, 09:54 AM | #9 |
Gone Wild
Join Date: Sep 2009
Location: DOVER,DE
Posts: 533
|
Re: Alltrax programinng for the complete idiot
The alltrax is on the cart and programed cart is running,haven't had a ride yet.After reading the tutorial it was much easier than I antisipated.Had a small problem and needed to talk to Alltrax,and met a guy named Rich answered all my questions,he also sent me the upgraded program so now the controller is maped perfectly to the D&D motor.He seems to think this is a good combo,Thanx Rich and Alltrax..Can't wait for the ride !Dave
|
11-21-2010, 02:30 PM | #10 |
Gone Wild
Join Date: Sep 2010
Location: Mia, Fl.
Posts: 424
|
Re: Alltrax programinng for the complete idiot
how did it go?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Idiot Snow Plow Driver | Videos | |||
Idiot Question on Reverse cable removal! | Gas Yamaha |