05-23-2008, 10:57 AM | #1 |
Not Yet Wild
Join Date: May 2008
Posts: 5
|
ITS w/ 72 volts
Hey Guys. Decided to go 72 V. I have a 95 EZGO w/ ITS. The question is, do I run full pack voltage to the ITS, or do I only run 36 V to it. If I am only supposed to run 36V to it, will 40V work, since I am running 8V batteries?
Thanks!!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2008, 03:41 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: ITS w/ 72 volts
I "think" the ITS will work at 72 volts just fine. If not I don't think alltrax would make a controller for 72 volts and then accept an ITS type throttle. Wiring the control wiring at 40 volts will work to.
|
05-23-2008, 09:14 PM | #3 |
Not Yet Wild
Join Date: May 2008
Posts: 5
|
Re: ITS w/ 72 volts
Well, it seems to work fine. If anyone is contemplating going to 72 DO IT!!!
Zack |
05-24-2008, 11:57 AM | #4 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: ITS w/ 72 volts
|
05-25-2008, 10:41 PM | #5 |
Not Yet Wild
Join Date: May 2008
Posts: 5
|
Re: ITS w/ 72 volts
It does in fact work on 72 V. I just want to make sure that it is going to last!!!
I'll get some pics up in the next few days. Zack |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Its-pot Volts | Electric EZGO | |||
12 volts source | Big Block Talk! | |||
extra volts | Extreme DC! | |||
72 volts all with 6 volts? | Extreme DC! | |||
12 volts with key ON? | Gas Yamaha |