|
04-11-2013, 08:03 PM
|
#1 |
|
Gone Wild
Join Date: Jan 2012
Posts: 178
|
Reversing contractor??
I know this question is not extreme dc but I know their is alot of knowledge in this forum. I want to convert my Marathon I am rebuilding over to a reversing contactor and am kinda confused as to what size to buy. My cart will stay 36v, I have 400a Curtis controller with a GE D295 motor with 25" tires. I am also thinking I want to use one with a 24v coil. Thanks in advance!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-15-2013, 06:34 PM
|
#2 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Reversing contractor??
I would buy a 36 volt 400amp contactor. You will need the F/R switch also are a toggle switch.
If you go to cloud electric it sends you here.   http://www.powertronx.com/product-p/ct-ptx-ur-400a.htm |
|
|
|
|
04-15-2013, 07:08 PM
|
#3 |
|
Gone Wild
Join Date: Jan 2012
Posts: 178
|
Re: Reversing contractor??
Sweet!! Thanks for the reply man. I was gonna use a three way toggle switch and get rid of the f/r switch since my panel that the f/r switch was mounted to on my Marathon is rusty and I got another one made. Figured it would clean it up a bit
|
|
|
|
|
04-15-2013, 09:02 PM
|
#4 |
|
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: Reversing contractor??
I have done several of these conversions and love them. I have 2 DS carts I did and my 72 volt monster cart.
  This is the one for the 72 volt monster cart.  |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| reversing pot box resistance | Extreme DC! | |||
| reversing a series motor without a reversing contactor? | Electric EZGO | |||
| Biggesst Reversing Contactor | Extreme DC! | |||
| Electric reversing rearend? | Design Center | |||
Linear Mode
