Flywheel removal

madgasser

What is best way to loosen flywheel nut. I broke a fin trying to anchor with a crow bar. Dumb stupid ooh ooh ahhhhahhh.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Spicyunicorn

Impact wrench will take it right off if you don't have one turn motor over so Piston is bdc compression stroke and feed clean rope through the spark plug hole once you have enough rope the Piston will compression again the rope and you should be able to get the nut off repeat this process when going back together to torque the nut

madgasser

Thanks a bunch. will the engine run smoothly with the fin broken off?

Spicyunicorn

Are the fins cast or plastic

madgasser

cast

madgasser

Took engine out, impact did the trick, . will the
flywheel work with broken fin

Spicyunicorn

I've never ran one with a broken fin but it should be ok IF it isn't out of balance just make sure when you get it back together it doesn't have a vibration if it does it may take out bearings

madgasser

Ehhum imahack, I'm wondering if I should cut off a fin directly opposite of already broke one