290 won't fire

PIB-My-Ride

I pulled and re-installed my clutches. After putting everything back together, I put the cart in neutral, spun the microswitch and stepped on the pedal. It spins fine, but won't fire. I've set it back to normal and tried in-gear, same deal.

I had used an impact drill to pop the drive clutch. It was shaking the cart pretty well, so whatever is going on, I doubt it's coincidental...

It doesn't seem to be getting a spark. I'm saying that because I think my Tiny Tach usually registers something during a prolonged start. It's not reacting at all. (it's never had a running or starting issue)

What the heck did I do?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Springbok

After a prolonged starting attempt, is the plug electrode wet with fuel?

PIB-My-Ride

I haven't checked yet. I was focusing on spark because of the tach not reading, but I was surprised that I didn't smell any gas in the exhaust...