RPM Litmiter

kellett5261 · 08-08-2018, 08:52 AM

Has anyone had issues with the RPM Limiter on a Club Car 92-96?

I have a 94 and i think i finally trouble shooted it down to the RPM limiter, the governor seems to be working correctly after i replaced the cable due to age and wear & tear.

The cart jumps high in RPMs and is bouncing off limiter @ 14-15 mph. the governor is not exactly where i need it to be so i know there is more adjustning but has anyone had this problem with the limiter?

I am going to disconnect the ground on the limiter when i get home today and see if that takes care of my problem but i dont want to leave it off becuase i dont need someone else thats driving to gernade my motor.

kgsc · 08-08-2018, 09:31 AM

With stock wheels and tires 14-15 is about right. Loosen up on the governor until it quits and you should be fine

gadog · 08-08-2018, 09:43 AM

As long as you don't have any wild drivers that want to see how fast you can go I would leave it off.

kellett5261 · 08-09-2018, 12:22 PM

i have a lift and 22x11x10 tires. any idea what the speed would be? i will turn back my throttle cable so i dont blow the motor.

Jimmie · 08-09-2018, 06:51 PM

If your clutches are not opening and closing as they should,as in stuck, you will hit the rpm limiter at a lower speed. Put it in maintenance mode and check clutch operation.

Maintenance Mode:

Lift up the seat look on the back side of the shifter.
Theirs a white knob as you move the shifter from F to R you
can see it activate the micro switches.
Pull the knob out and turn it 180 degrees now it will start in neutral
and not in F or R

kellett5261 · 08-10-2018, 08:23 AM

my clutch is operating fine. ive been debating to upgrade but i may end up getting a new cart in the near future. i am going to give the cart a test run today and set the throttle cable to about 22-25 mph

08-08-2018, 08:52 AM	#1
kellett5261 Gone Wild Join Date: Mar 2018 Location: South FL Posts: 243	RPM Litmiter Has anyone had issues with the RPM Limiter on a Club Car 92-96? I have a 94 and i think i finally trouble shooted it down to the RPM limiter, the governor seems to be working correctly after i replaced the cable due to age and wear & tear. The cart jumps high in RPMs and is bouncing off limiter @ 14-15 mph. the governor is not exactly where i need it to be so i know there is more adjustning but has anyone had this problem with the limiter? I am going to disconnect the ground on the limiter when i get home today and see if that takes care of my problem but i dont want to leave it off becuase i dont need someone else thats driving to gernade my motor.

08-08-2018, 09:31 AM	#2
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,141	Re: RPM Litmiter With stock wheels and tires 14-15 is about right. Loosen up on the governor until it quits and you should be fine

08-08-2018, 09:43 AM	#3
gadog Not Yet Wild Join Date: Jul 2012 Posts: 4	Re: RPM Litmiter As long as you don't have any wild drivers that want to see how fast you can go I would leave it off.
gadog Not Yet Wild Join Date: Jul 2012 Posts: 4

08-09-2018, 12:22 PM	#4
kellett5261 Gone Wild Join Date: Mar 2018 Location: South FL Posts: 243	Re: RPM Litmiter i have a lift and 22x11x10 tires. any idea what the speed would be? i will turn back my throttle cable so i dont blow the motor.

08-09-2018, 06:51 PM	#5
Jimmie Gone Wild Join Date: Oct 2009 Location: Lee County, Georgia Posts: 521	Re: RPM Litmiter If your clutches are not opening and closing as they should,as in stuck, you will hit the rpm limiter at a lower speed. Put it in maintenance mode and check clutch operation. Maintenance Mode: Lift up the seat look on the back side of the shifter. Theirs a white knob as you move the shifter from F to R you can see it activate the micro switches. Pull the knob out and turn it 180 degrees now it will start in neutral and not in F or R

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-10-2018, 08:23 AM	#6
kellett5261 Gone Wild Join Date: Mar 2018 Location: South FL Posts: 243	Re: RPM Litmiter my clutch is operating fine. ive been debating to upgrade but i may end up getting a new cart in the near future. i am going to give the cart a test run today and set the throttle cable to about 22-25 mph