04-22-2019, 11:14 AM | #1 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Carryall1 Seat Size?
i picked up a 97 carryall1 turf a couple months back but it does not have any seats. does anyone have measurements to cut new plywood to install seats? was told this cart had the 1 piece solid backrest. thanks for any input. will seats from a ds fit on here?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-22-2019, 11:57 AM | #2 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: Carryall1 Seat Size?
Mine is 40.5" wide x 17" deep.
No, a DS seat will probably not fit. DS seats have armrests on the sides, and also have that pivot/mount thing on the front of it to let you lean the seat forward. The carryall fits inside that little channel and has the steel armrests attached to the body/frame. |
04-22-2019, 12:01 PM | #3 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: Carryall1 Seat Size?
Heres a few pictures
|
04-22-2019, 12:04 PM | #4 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Carryall1 Seat Size?
I have the aluminum back frame and the side armrests for the carryall. didn't know if I took the hinge clips and arm rests off a ds if it would fit in there or be wide enough...
|
04-22-2019, 12:05 PM | #5 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Carryall1 Seat Size?
is that 40.5 x 17 the size of the wood backer for the bottom cushion?
|
04-22-2019, 12:09 PM | #6 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: Carryall1 Seat Size?
The wood backer. Sorry pics didn't work the first time... I would recommend some pretty thick wood though. Unlike a DS that rides on top of the body, the carryall fits into that metal channel around the edges so not a ton of support there. I would imagine that's why it has that L channel going along the bottom of it.
Mine came without a backrest so I made my own 1 piece. I believe they're supposed to be individual back rests but I usually have kids riding with me so I like the 1 piece back. I do need to re-do it now that it's lifted so it fits between the roof struts, so I can lower it back down again. I raised the roof higher before I lifted it because I kept hitting my head on it lol. Now I climb up into it so it doesn't need to be as high, but not a huge priority, i'll get to it eventually. |
04-22-2019, 01:02 PM | #7 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Carryall1 Seat Size?
I make mine from 3/4 plywood. 40-1/2" by 17-1/2". Round the corners about a 1" radius, and drill at least Four 1/2" holes somewhere in the center for ventilation. If you really want to get crazy you can sand down the edges so they aren't so sharp and it will help keep the vinyl from ripping on the edges.
There should be 1-1/2" wide rubber strips on the bottom along each side. I have a few that have one or two missing and haven't found an exact replacement, but I've found that black garage door seal works pretty well. It keeps the vinyl from rubbing on the aluminum frame and rubbing holes in the corners. It also helps keep the seat from sliding around, or knocking on the frame if you go over bumps a little too fast. If you don't have the lift strap it really helps to have that in the back center. Any kind of strap material or an old seat belt makes a good replacement. CP, none of mine have that L bracket. That might on there be because someone used wood to thin, or they cut it too narrow so it wanted to slide back and forth on the seat frame. When it's cut the right size it won't be able to slide forward or back. |
04-22-2019, 01:52 PM | #8 | |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: Carryall1 Seat Size?
Quote:
I took the plastic bumpers off this one when I recovered it, still have them, but never put them back on. I still have them, maybe I should get around to that Agreed on the seat strap in the back. Makes it much, much easier to remove the seat to put gas in it! |
|
04-22-2019, 02:20 PM | #9 |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Carryall1 Seat Size?
what would be a good source for foam if making one from scratch? this cart didn't have seats when I got it.
|
04-22-2019, 02:27 PM | #10 |
Gone Wild
Join Date: Mar 2012
Location: Baton Rouge, La.
Posts: 398
|
Re: Carryall1 Seat Size?
Several layers of carpet padding works good and is cheap
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2008 Carryall1 | Members Rides | |||
Parts 1990 carryall1 | Gas Club Car | |||
rear seat floorboard size? | Gas Yamaha | |||
Bolt size for seat rails | Gas Club Car | |||
my carryall1 resto | Big Block Talk! |