lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-13-2009, 08:19 PM   #1
Not Yet Wild
 
Join Date: May 2009
Posts: 26
Default plastic patching?

OK i know i am a dumb a$$ but i was installing a diamond plate kick plate, and the top corners stuck out a little....decided to get some self taping screws and put them in the top corners to hold in place! Now i have a hole in my gas tank! Anyone ever patched one? Thanks in advance
Jeff
00 mod is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-13-2009, 09:14 PM   #2
THE CUSTOM KID
 
custom carts's Avatar
E-Z-GO
 
Join Date: Oct 2008
Location: Tallahassee Florida
Posts: 820
Default Re: plastic patching?

dont feel bad i was puting a new body and i drilled my tank i did a fix like i took the tank out take all the gas out flush with water then fill it with water then i got a srew driver i heated it up with tourch then i melted some plastic from coke bottlel with the srew driver then i patched it slowly and its been six month no leak thats not the proper way but it worked for me good luck
custom carts is offline   Reply With Quote
Unread 05-13-2009, 09:35 PM   #3
Not Yet Wild
 
Join Date: May 2009
Posts: 26
Default Re: plastic patching?

anyone ever used the plastic bonding/patching stuff you can buy at home depot? it says oil and gas impermeable, and also water resistant? also lists for patching gas tanks? i have put on 2 coats so far....haven't tried to hold any gas with it yet....im going to put another coat on in the am and then try tomorrow afternoon!
Jeff
00 mod is offline   Reply With Quote
Unread 05-14-2009, 08:12 AM   #4
Not Yet Wild
 
Join Date: May 2009
Posts: 26
Default Re: plastic patching?

heres the stuff i am trying!

http://www.eclecticproducts.com/sealall.htm
00 mod is offline   Reply With Quote
Unread 05-14-2009, 09:42 AM   #5
Gone Wild
 
WGW Foods's Avatar
E-Z-GO
 
Join Date: Feb 2009
Location: Wisconsin
Posts: 164
Default Re: plastic patching?

I used FAS-WELD plastic repair epoxy putty. Working like a charm 2 years now and no leaks. I bought it at NAPA auto parts store. Good luck.
WGW Foods is offline   Reply With Quote
Unread 05-14-2009, 05:09 PM   #6
Not Yet Wild
 
Join Date: May 2009
Posts: 26
Default Re: plastic patching?

ok after 3 rounds of globing this stuff on there, i left it all day with gas in it, and no leaks!!!!!!! went ahead and put a couple pieces of trusty ole duct tape over it just to make me feel better as well! I will update in a couple weeks to let everyone know how it is going!
Jeff
00 mod is offline   Reply With Quote
Unread 05-14-2009, 11:18 PM   #7
Not Yet Wild
 
moped's Avatar
Club Car
 
Join Date: Apr 2008
Location: Loogootee, IN
Posts: 66
Default Re: plastic patching?

hi billy mays here for mitey putty!!!! hahahahahaha
moped is offline   Reply With Quote
Unread 08-28-2009, 09:11 PM   #8
Not Yet Wild
 
Join Date: May 2009
Posts: 26
Default Re: plastic patching?

ok well i have been on this thing for a couple weekends a month for the ast 3 months or so and NO problems! Just thought i'd give an update!
Jeff
00 mod is offline   Reply With Quote
Unread 08-28-2009, 09:20 PM   #9
Gone Wild
 
tonyton's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
Default Re: plastic patching?

Quote:
Originally Posted by 00 mod View Post
ok well i have been on this thing for a couple weekends a month for the ast 3 months or so and NO problems! Just thought i'd give an update!
Jeff
Thanls...It's always good to know what is working, or not.
tonyton is offline   Reply With Quote
Unread 08-29-2009, 01:10 AM   #10
Not Yet Wild
Club Car
 
Join Date: Mar 2009
Posts: 58
Default Re: plastic patching?

I did the same thing what I did was drill put a piece of metal between the tank and the plate . then I drilled a 3/4 inch hole , then took out the metal plate and put in a screw with a rubber washer. worked great
hammer322 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Patching a hole in the crankcase. Gas Club Car
99 plastic body Electric EZGO
plastic ramps Gas Yamaha
Plastic Repair Body and Paint
Plastic dye for my cart roof Body and Paint


All times are GMT -5. The time now is 09:31 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.