what's wrong with this kit ?

mtndew · 07-01-2009, 11:20 AM

I installed a rear seat kit during my build and just about done.The rear seat angle is killing me as everyone else seem level. Cart has heavy duty rear springs and frame is straight. Any idea's ?

hotmomma · 07-01-2009, 11:53 AM

The trouble we have had with our cart which is an EZ-GO is that the foot platform is not supported enough and depending on the weight on the back it seems to loosen the bolts and move the platform down. You might check that too I know that you just added it but you may also have to modify the bottom with another brace for support. Hope that helps a little...

gornoman · 07-01-2009, 12:22 PM

Last one I saw like that was the result of installing a seat made for an EZ-Go on a Club Car. Came out the exact same way. Not saying that's what you did, jus' sayin'.

mtndew · 07-02-2009, 02:09 AM

Manufacture

said to bend seat mounts. still leaves me short 4" on the support brackets and intacked step is 4" off of bumper.
Aghhh

drlugod · 07-02-2009, 05:08 AM

I had that problem with an old cart i bought, I just welded up some support to strenghten things.

meschw · 07-10-2009, 11:24 AM

Put some golf clubs on it and go golfing - that will do the trick!
Just kidding - no advice to offer, but will follow thread for future use!
Good Luck!

mtndew · 07-10-2009, 11:47 AM

Quote:

Originally Posted by drlugod

I had that problem with an old cart i bought, I just welded up some support to strenghten things.

well for the cost of the kit it should be bolt and play.

I've been screwed on this build from day one BGW sponsor included
It Took 6 days for another kit to be here when it was suppose to be 3
then BGW sponsor didn't want to file a claim with the brown man nor refund shipping since UPS didn't make it guarantee on 3 day shipping.

bayshoreinc · 07-10-2009, 04:07 PM

Some areas are not guaranteed especially if you are in a rural area. The place you purchased from would have no idea if its a guaranteed delivery area. Don't blame it on the BGW sponsor when its actually the shippers fault.

mtndew · 07-10-2009, 04:46 PM

Quote:

Originally Posted by bayshoreinc

Some areas are not guaranteed especially if you are in a rural area. The place you purchased from would have no idea if its a guaranteed delivery area. Don't blame it on the BGW sponsor when its actually the shippers fault.

UPS Service Area
Destinations and Origins:
All 50 states and Puerto Rico

what I'm upset about is they won't even file a claim.

dirtysouth · 07-10-2009, 04:56 PM

Quote:

Originally Posted by mtndew

UPS Service Area
Destinations and Origins:
All 50 states and Puerto Rico

what I'm upset about is they won't even file a claim.

Do they have a ligit claim? I know Brown has all sorts of reasons not to deliver on time, weather, etc... If they didn't make the deadline, then the said sponsor would file a claim and get credit and pass that credit on to you.

07-01-2009, 11:53 AM	#2
hotmomma Wildly Wicked! Join Date: May 2009 Location: TEXAS BABY! Posts: 1,955	Re: what's wrong with this kit ? The trouble we have had with our cart which is an EZ-GO is that the foot platform is not supported enough and depending on the weight on the back it seems to loosen the bolts and move the platform down. You might check that too I know that you just added it but you may also have to modify the bottom with another brace for support. Hope that helps a little...

07-01-2009, 12:22 PM	#3
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,284	Re: what's wrong with this kit ? Last one I saw like that was the result of installing a seat made for an EZ-Go on a Club Car. Came out the exact same way. Not saying that's what you did, jus' sayin'.

07-02-2009, 02:09 AM	#4
mtndew Getting Wild Join Date: May 2009 Location: Iowa Posts: 88	Re: what's wrong with this kit ? Manufacture said to bend seat mounts. still leaves me short 4" on the support brackets and intacked step is 4" off of bumper. Aghhh

07-02-2009, 05:08 AM	#5
drlugod Getting Wild Join Date: May 2009 Location: Arnold, MO Posts: 77	Re: what's wrong with this kit ? I had that problem with an old cart i bought, I just welded up some support to strenghten things.

07-10-2009, 11:24 AM	#6
meschw Not Yet Wild Join Date: Jun 2009 Posts: 9	Re: what's wrong with this kit ? Put some golf clubs on it and go golfing - that will do the trick! Just kidding - no advice to offer, but will follow thread for future use! Good Luck!
meschw Not Yet Wild Join Date: Jun 2009 Posts: 9

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-10-2009, 04:07 PM	#8
bayshoreinc Not Yet Wild Join Date: Jun 2009 Posts: 21	Re: what's wrong with this kit ? Some areas are not guaranteed especially if you are in a rural area. The place you purchased from would have no idea if its a guaranteed delivery area. Don't blame it on the BGW sponsor when its actually the shippers fault.
bayshoreinc Not Yet Wild Join Date: Jun 2009 Posts: 21

Similar Threads
Thread	Forum
What Did I Do Wrong ?	Electric EZGO
What's wrong with my 1986 EZ-GO	Electric EZGO
What is wrong with my cart????	Electric EZGO