Throttle linkage ball end?

Caticus

OK - I give, I looked in Buggies unlimited for the linkage end that bolts into the gas pedal on a 92 CC gasser. Only one I found is for a EZGO. It is way to short. Anyone know where I can find them? I was adjusting the length to get rid of some of the play and broke the ball where the linkage rod goes on. I have a # 10 screw that I ground the head round for now but would like to replace it with the right thing.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

Throttle linkage is a dealer Item or used. I think I have one from '91? They made different lengths. Which one are you needing?

Another thought is just take the broken one to an auto parts house and see if they have something to fit?

Caticus

Scottyb:

Thanks for the reply. I beleive that the length through the pedal attachment is about 3/4 inch or so. The bolt looked like about an inch and a quarter long. It had a #10 metric ni-lock nut holding it on. I managed to save the coupler even though it was pretty rusty. A littler PB Blaster works wonders. The nut I have is worth saving, just broke the ball off the end.

scottyb

I would go to the auto parts store first..... or CC dealer close by?

sudsbaja

I just bought one from here. Item# 356. Hope this helps and is what your in need of.
https://www.cartszone.com/catalog/ca...rchresults.htm