12-27-2009, 03:27 PM | #1 |
Not Yet Wild
Join Date: Oct 2009
Posts: 13
|
1990 kf82 cam align
Hey guys...posted once before...Working on the Fed Ex #11. You guys are great and very helpful. Rebuilding the 1990 kf82...used fingernail polish to mark the cam/crank/balancer. Looks like it can still be 180 off even with the marks. Did a search first and "oddpowers" had a similiar question on 12-19-09 With no answer. Does anybody have an answer on how to line up properly?
DSCF6797.jpg DSCF6532.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-27-2009, 04:04 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1990 kf82 cam align
Me me look...... I might have saved something.....
|
12-29-2009, 12:36 AM | #3 |
Not Yet Wild
Join Date: Oct 2009
Posts: 13
|
Re: 1990 kf82 cam align
Scotty..You are the bomb! Short story...Did this project for my Dad...Club Car dealer said make flower box out of it. bought rebuilt parts for motor...laying in bed remembered, I did not set the keepers for the connecting rod after the lower case all assembled...pulled apart and noticed the cam could be in 180 off??????????????? You saved me a lot of work..went out and looked for the marks on the cam and crank and tah dah....they were there. My Dad lives in Arizona and would of headed there in a week or so with the motor 180 out...Thank You for saving the day!!!!!!!!!!!!!
One more question...duh...Does anyone know the ring gap on a .050 over piston? I am taking the cylinder in to be machined...the machinist may know??? I would like to provide info if I could. Thank You all for the best site ever...will keep you alll up to date as soon as this thing fires again. |
12-29-2009, 01:06 AM | #4 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 1990 kf82 cam align
nice job on the cart---
|
01-30-2010, 02:32 PM | #5 |
Gone Wild
Join Date: Feb 2008
Location: Anderson, IN
Posts: 535
|
Re: 1990 kf82 cam align
Thanks n2goodeals2, However I still have not solved my problem. There are no marks on my crank gear for the cam. Here's a pic maybe someone can help me.
|
01-31-2010, 12:47 AM | #6 |
Not Yet Wild
Join Date: Jul 2009
Location: Northwest Washington
Posts: 67
|
Re: 1990 kf82 cam align
n2g, all my manual has on piston ring gap is a wear limitation. It says the piston ring gap should not be greater than .039, also the final hone on the cylinder should leave a piston clearance of .0006 to .0018.
Good Luck |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to align steering wheel | Electric Club Car | |||
Align Front end on precedent | Electric Club Car | |||
'86 kf82 | Gas Club Car | |||
How to align a 94 EZGO | Electric EZGO | |||
Front end camber align post lift | Gas Club Car |