Motor for 2004

papaw · 04-18-2010, 09:37 AM

cAN I PUT THIS ENGINE IN 2004 cc and what all would i need to do?

hp: 23
Brand: Briggs & Stratton
Feature: Vanguard
Feature: Alternator 16Amp
Overhead Valve Design: Yes
Cast Iron Cylinder Sleeve: Yes
Electric Start: Yes
Mounting: Horizontal Shaft
Fuel Tank: no tank, has fuel pump
Shaft Size: 1"Dx3"L
Muffler: None
Oil Capacity: 1.16 Quart w/o Oil Filter, 1.48 w oil filter
Oil Type: SAE 10w-30
Shipping Weight: 160 Pounds
Condition: New
Warranty: 2-Year Manufacturer's Warranty

BLACK DEATH · 04-18-2010, 10:49 AM

Yes you can but you will run the rearend in reverse to go forward as the engine in your cart has a different rotation. The cart may be slower as reverse is a lower gear ratio but it will have lots of torque. Alos may need to lift the cart for clearance. Clutch wise I dont know if you can use your stock one but I think others have. Need a different belt as I have read.

papaw · 04-18-2010, 11:06 AM

Thanks for the rely, not very happy with the speed on this cart. have to do something.

samsonone · 04-21-2010, 06:32 PM

Don't know about Brigg's but there is a kit out there for a Honda conversion can't remember who has it but do some reseach if I can fine it will let ya know.

04-18-2010, 09:37 AM	#1
papaw Gone Wild Join Date: Apr 2010 Location: Indiana Posts: 165	Motor for 2004 cAN I PUT THIS ENGINE IN 2004 cc and what all would i need to do? hp: 23 Brand: Briggs & Stratton Feature: Vanguard Feature: Alternator 16Amp Overhead Valve Design: Yes Cast Iron Cylinder Sleeve: Yes Electric Start: Yes Mounting: Horizontal Shaft Fuel Tank: no tank, has fuel pump Shaft Size: 1"Dx3"L Muffler: None Oil Capacity: 1.16 Quart w/o Oil Filter, 1.48 w oil filter Oil Type: SAE 10w-30 Shipping Weight: 160 Pounds Condition: New Warranty: 2-Year Manufacturer's Warranty

04-18-2010, 10:49 AM	#2
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: Motor for 2004 Yes you can but you will run the rearend in reverse to go forward as the engine in your cart has a different rotation. The cart may be slower as reverse is a lower gear ratio but it will have lots of torque. Alos may need to lift the cart for clearance. Clutch wise I dont know if you can use your stock one but I think others have. Need a different belt as I have read.

04-18-2010, 11:06 AM	#3
papaw Gone Wild Join Date: Apr 2010 Location: Indiana Posts: 165	Re: Motor for 2004 Thanks for the rely, not very happy with the speed on this cart. have to do something.

04-21-2010, 06:32 PM	#4
samsonone Not Yet Wild Join Date: Mar 2010 Location: jacksonville Fl. Posts: 49	Re: Motor for 2004 Don't know about Brigg's but there is a kit out there for a Honda conversion can't remember who has it but do some reseach if I can fine it will let ya know.

Similar Threads
Thread	Forum
2004 Txt	Electric EZGO
Need advice on Motor Upgrade for 2003 or 2004 PDS cart	Electric EZGO
Old 1982 & 2004 Gas Ez Go	Gas EZGO
2004 e-z go	Electric EZGO
2004 Electric Ez go	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum