Club Car Power Spring

gregb

I started to replace the original spring with the power spring and noticed that the power spring is wound the opposite way. Does anyone know why? Does it matter? This is for a '92 DS.

Thanks,
Greg

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

vzdude

Try turning it around........

gregb

That's like turning a screw around. It doesn't change....

papaw

Sounds like you have the wrong spring, the same spring fits 86-09 DS and 04-09 Precedent i think. Are you sure it is the right spring?

roady89

I believe we had a rather heated discussion one time about this....and I THINK Tom@CPP finally chimed in and said It didn't matter which way the spring went. (Dont quote me on that, might be wrong. I'm sure he'll be in later and post)

gregb

Well, it is wound the opposite direction. But, does it really matter? I'm going to call Tom at CPP Monday morning.

gregb

Thanks Roady. I took so long typing that you slipped one in on me. I tried to find a similar post but couldn't. Hope Tom has the answer.

papaw

I just looked on CPP web site if you got it from Tom they only list one power spring for CC So as ROADY said doesn't matter which way the spring goes.

gregb

Thanks papaw. That is the only spring CPP has for the CC Ds. I wish I understood more about it, though. Seems that in one direction the spring would the tend to unwind causing an outward force to hold the clutch sheaves together and the other direction the spring would wind tighter and allow the sheaves to open easier. But, if it works ok, I'll just go along with that!

Jimmie

Found this in a search, sorry if your talking about a different spring.

http://www.buggiesgonewild.com/gas-c...rectional.html

Jimmie