87 club car clutch snaped

nitro1

hey guys my 87 club car rear clutch snapped in half after trying to take it off with a puller

but

there is a thin piece of steel/round plate on the shaft still with a thin cut line down it and at the end of the shaft looks like a locking collier but it has a hex key in it DOES THAT COME OFF TO ???

if so any ideas how to get the rest of the parts off since the hole clutch is broke off

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

DOOmsman

Is this the clutch?

nitro1

yes im pretty sure it is

nitro1

every thing in RED IS OFF every thing in BLUE IS ON

nitro1

after i looked at it more its not it, i do not have a nut that threads in at the end

nitro1

here it is pic of my shaft and the remaining parts i need off

DOOmsman

get some liquid wrench or pb blaster'""not wd40""""
and start soaking the shaft and square key.
It may help to jack up the side of the cart to let it lay in there.

jiminpa

If you can find it in your area, something I have found that works much much better than Blaster or Liquid Wrench is "Aero Kroil" it's very expensive, I paid like $12 for the last 10 oz. can I got, but, it works great. Looking at my can, it has a web site kanolabs.com. Spray it down and let it set over night to start out. things from this point on can get dangerous for your shaft & case & seals, especially for someone with little experience. I will wait a bit before saying what I would do next.

nitro1

thank u for the tip i used PB blaster and lil cutting/hammering and it came loose and it had a lot of rust under it

jiminpa

After you clean up the shaft but before you put it all back together, get some Permatex Anti-Seize and coat the contact surfaces of both parts before you put it back together again. If you ever have to take it apart again, it will slip right off like new.