|
09-21-2011, 04:01 PM
|
#1 |
|
Gone Wild
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
|
Only runs with micros up?
I have a 1990 gasser that I have been trying to get fixed up. I just replaced the key switch, it did not have one at all, and it will only run with the microswitched pulled up on the f/r switch. I wired the switch exactly like it said on a thread i found. I am tickled to hear it run, but wonder why it only runs the way it does. whether you are in f,n, or reverse, they have to be pulled up.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-21-2011, 06:29 PM
|
#2 |
|
The Last Moja Morani
 Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Only runs with micros up?
try pulling out the yellow knob and turning it 180 degrees when you put knob back in and try and start it.......................................
 |
|
|
|
|
09-21-2011, 07:19 PM
|
#3 |
|
Gone Wild
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
|
Re: Only runs with micros up?
Nothing
|
|
|
|
|
09-21-2011, 07:21 PM
|
#4 |
|
Gone Wild
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
|
Re: Only runs with micros up?
I pulled it out, rotated, pushed in, and it is the same as before. What does that do anyway. I had no idea it did that.
|
|
|
|
|
09-21-2011, 07:42 PM
|
#5 |
|
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Only runs with micros up?
thats maintence mode kinda like nueltral.......the yellow knob has 3 cams on it ( high spots ) and when the knob is in the right position when you put shifter in F or R if you look you,ll see it raises the lever on microswitch so cart will start in either F or R and you can put the knob so it will only start in nueltral ................i suggest you play with that knob ( not your knob )...............lolol.................and work shifter and watch till its in a position where it raises the micro switch arm...............that has to be where problem is..............................
|
|
|
|
|
09-22-2011, 07:17 AM
|
#6 |
|
Gone Wild
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
|
Re: Only runs with micros up?
Thanks for the info. Also thanks for the verification on which knob to pull!LOL... Lets face it, that can get confusing
|
|
|
|
|
09-22-2011, 09:27 PM
|
#7 |
|
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Only runs with micros up?
figure anything out with this yet?.............................
|
|
|
|
|
09-23-2011, 06:40 AM
|
#8 |
|
Gone Wild
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
|
Re: Only runs with micros up?
Going to try again this afternoon. Thursdays are a very busy day. Fridays on the otherhand....well....I can play with my toys!
|
|
|
|
|
09-23-2011, 05:35 PM
|
#9 |
|
Gone Wild
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
|
Re: Only runs with micros up?
Had to bend one of the micros tab down a little bit. Cleaning the carb now. Hopefully a good news update after while!!!!! Thanks Shadowman
|
|
|
|
|
09-23-2011, 06:09 PM
|
#10 |
|
Gone Wild
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
|
Re: Only runs with micros up?
Carb is a mess. got some of the parts soaking in acid. Looks like it will be tommorow
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Runs 10 minutes then shuts off, wait 5 then runs again... | Electric EZGO | |||
| runs good cold runs bad hot? | Gas EZGO | |||
| Reverse...runs awesome Forward..runs bad | Gas EZGO | |||
| 89 marathon runs stalls runs stalls | Gas EZGO | |||
| micros are good | Electric EZGO | |||
Linear Mode
