|
07-31-2012, 10:53 PM
|
#1 |
|
Gone Wild
Join Date: Apr 2010
Location: Interlachen,Fl
Posts: 326
|
FE350 crankshaft question
Before you say search I already have. Has anyone removed the balance weight on the FE350 and if so how did it run? I pulled mine apart tonight after my son ran it w/ out oil last night and it started knocking. I found on the clutch side that the arm that goes on the crank to the weight moves up and down freely but on the fan side it fits the crank rather well. Is it supposed to move around a lot?
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-01-2012, 06:38 AM
|
#2 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: FE350 crankshaft question
Here's a repair manual for the FE engines, page 3-54, thru 3-60 may explain some things.
most of the jargon is Greek to me, but from what I can tell, the balancer link rod should be tight at the crankshaft gear, and loose on the other side... how loose??? it probably shouldn't be loose enough to make it knock! hope this helps! |
|
|
|
|
08-01-2012, 02:13 PM
|
#3 |
|
Gone Wild
Join Date: Apr 2010
Location: Interlachen,Fl
Posts: 326
|
Re: FE350 crankshaft question
Looks like I'm gonna need a crankshaft. Talked to Club Car directly this morning and was told there should not be any play. Thanks for link so I could try to figure it out before dropping big money into a rebuild.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question about Crankshaft Seal | Gas EZGO | |||
| fe350 | Gas Club Car | |||
| Question about crankshaft | Gas EZGO | |||
| fe350? | Big Block Talk! | |||
| EZ-GO 350cc crankshaft question | Gas EZGO | |||
Linear Mode
