11-17-2013, 08:43 PM | #1 |
Not Yet Wild
Join Date: Nov 2013
Posts: 31
|
Fe-350
I have an 08 turf 1 that is in need of rebuilding. I have tryied all the tips to get it to stop smoking with no results. My question is what exactly should i replace? Piston and rings, valves,seats,retainers. Anything other than that? Also, all the rebuild parts i see are for ds or other carts, What is mine? Like i said, its a club car turf 1 2008 with a fe350. Thanks for any help. Also where would be the best place to order such parts?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-17-2013, 08:57 PM | #2 |
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: Fe-350
Basically until you tear it down and inspect everything, there is no telling what you'll "need". You can buy a complete rebuild kit, which aren't cheap, but until you know if your cylinder needs boring, you won't know what size piston/rings to order.
As for where, ebay is where I get most of my stuff. As long as it is for a 2008 club car FE350 any parts should work. Shouldnt matter what model. |
11-17-2013, 09:24 PM | #3 |
Not Yet Wild
Join Date: Nov 2013
Posts: 31
|
Re: Fe-350
Thanks, i rebuild my kids dirtbikes all the time so im ok with the tear down, but if im reading things correct here the fe350 cylinder does not come off its part of the case? Does this mean i have to pull the rod?
|
11-17-2013, 09:42 PM | #4 |
Not Yet Wild
Join Date: Nov 2013
Posts: 31
|
Re: Fe-350
Also, what is the best way to remove the engine? Do you pull the whole swing arm and springs? Or just remove the engine?
|
11-23-2013, 07:12 PM | #5 |
Not Yet Wild
Join Date: Nov 2013
Location: VANCOUVER B.C. CANADA
Posts: 2
|
Re: Fe-350
Hey there ...
Pulling the engine is easy in your car. What I usually do is pop the box off first (more room), disconnect the wiring harness and ground strap, then the cables, pop off the air cleaner pipe, take off the drive belt, remove the nuts off of the the transaxle that connect to the engine, remove the engine mounting bolts and lift the engine out. That pretty much it! |