Missing Piece???

whatzleft · 12-29-2013, 12:12 PM

hey guys... 90 club car... I'm thinking there ought to be some type of rubber mount in this pic? Doesn't look like anything has ever been there, but when trail riding it bounces up and down and slams pretty hard at times. Am I missing a piece here? Thanks!

dave*m · 12-29-2013, 12:22 PM

Its the front mount rubber that is missing. It slides in on the flat of powertrain plate.

danman · 12-29-2013, 12:24 PM

I believe there should be a rubber isolator that should slide over that flat piece to avoid the rattle you're talking about.

corkscrew · 12-29-2013, 01:15 PM

ebay item # 131066257268
Seller assumes all responsibility for this listing.

lockman1 · 12-29-2013, 02:01 PM

What the....?

It's called a "Snubber"!

Snubber 3.jpg

Most of BGW's fine sponsors have them!

Click>>> http://www.cartpartsplus.com/snubber-for-club-car

whatzleft · 12-29-2013, 04:26 PM

great I will get one ordered. Thanks for the pic also.

mndanielsncsu · 12-29-2013, 09:20 PM

Quote:

Originally Posted by lockman1

What the....?

It's called a "Snubber"!

Attachment 96159

Most of BGW's fine sponsors have them!

Click>>> http://www.cartpartsplus.com/snubber-for-club-car

How many inches did you drop your engine with that new snubber bracket you made?o I tried searching through all of the old snubber posts and never found where anyone said how much they dropped it. I have a 6" Allsports SS lift so thinking about this mod.

lockman1 · 12-30-2013, 09:49 AM

In that pic, the holes are 3" center to center... and the snubber didn't sit quite right!
I've since shortened it to 2" center to center!

Note: Depending on the year of your cart, you may have to modify your intake tube when lowering your snubber mount!

Intake hose.jpg

033.JPG

mndanielsncsu · 12-30-2013, 07:51 PM

Thanks Lockman! I saw the other posts about the extension for the air hose. What did you use for that, some kind of plumbing elbow and a flexible coupler?

4vertical · 12-30-2013, 11:49 PM

As far as the intake, the part number i used is briggs 691368. it is an upswept intake part that will need a slight modification to work. It needs a barbed fitting added and there was something with the mounting surface where the nuts seated that needed attention, but I don't remember exactly what it was.

I am not sure the part that lockman1 has is the exact one I used though.

After the intake is used it is off to the plumbing store! I think I was able to adapt part of an old radiator hose I had laying about.

12-29-2013, 12:22 PM	#2
dave*m Not Yet Wild Join Date: Nov 2013 Location: canada Posts: 65	Re: Missing Piece??? Its the front mount rubber that is missing. It slides in on the flat of powertrain plate.

12-29-2013, 12:24 PM	#3
danman Gone Wild Join Date: Dec 2012 Location: Tennessee Posts: 441	Re: Missing Piece??? I believe there should be a rubber isolator that should slide over that flat piece to avoid the rattle you're talking about.

12-29-2013, 01:15 PM	#4
corkscrew Gone Wild Join Date: Aug 2013 Posts: 211	Re: Missing Piece??? ebay item # 131066257268 Seller assumes all responsibility for this listing.
corkscrew Gone Wild Join Date: Aug 2013 Posts: 211

12-29-2013, 02:01 PM	#5
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,933	Re: Missing Piece??? What the....? It's called a "Snubber"! Snubber 3.jpg Most of BGW's fine sponsors have them! Click>>> http://www.cartpartsplus.com/snubber-for-club-car

12-29-2013, 04:26 PM	#6
whatzleft Not Yet Wild Join Date: Jun 2013 Location: nc Posts: 27	Re: Missing Piece??? great I will get one ordered. Thanks for the pic also.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-30-2013, 09:49 AM	#8
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,933	Re: Missing Piece??? In that pic, the holes are 3" center to center... and the snubber didn't sit quite right! I've since shortened it to 2" center to center! Note: Depending on the year of your cart, you may have to modify your intake tube when lowering your snubber mount! Intake hose.jpg 033.JPG

12-30-2013, 07:51 PM	#9
mndanielsncsu Gone Wild Join Date: Oct 2011 Location: Raleigh, NC Posts: 243	Thanks Lockman! I saw the other posts about the extension for the air hose. What did you use for that, some kind of plumbing elbow and a flexible coupler?

12-30-2013, 11:49 PM	#10
4vertical Gone Wild Join Date: Jan 2007 Location: La Porte Indiana Posts: 1,392	Re: Missing Piece??? As far as the intake, the part number i used is briggs 691368. it is an upswept intake part that will need a slight modification to work. It needs a barbed fitting added and there was something with the mounting surface where the nuts seated that needed attention, but I don't remember exactly what it was. I am not sure the part that lockman1 has is the exact one I used though. After the intake is used it is off to the plumbing store! I think I was able to adapt part of an old radiator hose I had laying about.

Similar Threads
Thread	Forum
My new to me piece of junk	Electric Club Car
13HP came in one piece	Big Block Talk!
looking for one piece AS5 windshield!	On Road Golf Carts!
Looking for a used nose piece	Electric Club Car
What is this piece on my Melex?	Melex