10-05-2008, 08:08 PM | #1 |
Not Yet Wild
Join Date: Sep 2008
Posts: 8
|
need more power 1998 cc
Just wondering what else Icould do i have a 1998 cc fe290 Ihad the clutch ground and had the power spring added I also installed the idle kit and spring I also have removed all governers and rev limiter !! But my friend has so much more low end power then my c.c!! Was wondering if there is a better belt to install or any easy upgrades I dont like getting beat by a ezgo!!! AND IS THERE AND WAY TO HELP THE FRONT END FROM WONDERING I HAVE A 6 INCH SPINDLE LIFT and its all over the road everything is tight and i did check the alighnmeant also should i remove the resticters in the air box i did install the jet kit when i did the clutch work! thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-09-2008, 09:09 PM | #2 |
Gone Broke
Join Date: Jul 2008
Location: Central Illinois
Posts: 758
|
Re: need more power 1998 cc
I also have the wondering front end on my 98 cc. I didn't notice it until I put my 8 inch lift on. I am thinking about a stabilizer.
|
10-09-2008, 09:59 PM | #3 |
Not Yet Wild
Join Date: Sep 2008
Posts: 8
|
Re: need more power 1998 cc
It is actually scary to drive it all out im afraid i will end up in the ditch!! i ordered a new heavy duty front spring today i will see if that will help out at all plus i put on the 2" extension to move the front tires forward! tired of the tires locking up on the fenders
|
10-10-2008, 06:26 AM | #4 |
Gone Broke
Join Date: Jul 2008
Location: Central Illinois
Posts: 758
|
Re: need more power 1998 cc
I'm sure you've checked but, are all the bushings good? As far as the ditch goes, that gives you a chance to try out that new lift! lol
|
10-10-2008, 06:37 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: need more power 1998 cc
I just typed 'alignment' into the search box (top of the page) and it brought up a lot of info on the subject. May be what is causing your carts to hunt or wander....
http://www.buggiesgonewild.com/search/result-152186/ |
10-14-2008, 06:25 PM | #6 |
Gone Wild
Join Date: Apr 2008
Location: Tipton,IN
Posts: 177
|
Re: need more power 1998 cc
should i start working on a holeshot nitrous kit?
|
10-14-2008, 06:27 PM | #7 |
Gone Wild
Join Date: Apr 2008
Location: Tipton,IN
Posts: 177
|
Re: need more power 1998 cc
can't be getting beat by a ez - go ,can't allow that #@$%
|
10-14-2008, 09:09 PM | #8 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: need more power 1998 cc
Welcome to the forum gainesbilly..................
|
10-14-2008, 09:24 PM | #9 |
Not Yet Wild
Join Date: Sep 2008
Posts: 8
|
Re: need more power 1998 cc
well i found out a couple of problems 1st on my clutch my idler bearing was bad and the secoung i changed my front leaf spring to a heavy duty spring and it did get rid of a lot of side to side sway i was haveing but now the tie rods a sitting on top of the frame!!! and the ez go has so much more low end torqe i dont think the fe290 can compete with the ezgo twin also does anyone have a pic of how the drive clutch is assembled i have had mine apart for a few days and im not sure where the white nylon shim goes i think it went next to the bearing but not 100 % sure thanks!!!
|
10-15-2008, 06:21 PM | #10 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: need more power 1998 cc
I'm not sure if this'll help...
The only nylon washers I can find, are on the weights! |
|
|
Similar Threads | ||||
Thread | Forum | |||
1998 smoking | Gas EZGO | |||
1998 g19 | On Road Golf Carts! | |||
1998 Par Car | Gas Columbia ParCar | |||
1998 cc gas | Golf Carts and Parts | |||
1998 Gas | Gas Yamaha |