|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
10-06-2008, 02:41 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 35
|
Installing spring stiffener from ebay?
Hi all
I bought a set of the spring stiffeners from ebay,they look like a 16 inch long bar of metal and they go under the existing springs in order to stiffen them for extra load like the back seat i want to put on. THey said 5 minute install and for the life of me,i cannot get them on,i have a 95 DS. I removed the u bolts that hold the axle to the spring and tried jacking under it,but it wont separate from the axle it seems. I know i have to be doing something blatantly stupid and i was hoping someone here would have the answer.thanks! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-06-2008, 09:00 PM
|
#2 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 35
|
Re: Installing spring stiffener from ebay?
anyone have any ideas or everremoved a spring from a club car?
|
|
|
|
|
10-06-2008, 09:05 PM
|
#3 | |
|
Getting Wild
Join Date: Jun 2008
Location: Gainesville, Ga
Posts: 76
|
Re: Installing spring stiffener from ebay?
Quote:
Try removing the 3 inch bolt at the aft end of the factory spring...that should allow you to get the 16" spring installed. Then re install everything. Bill |
|
|
|
|
|
10-06-2008, 09:12 PM
|
#4 |
|
Not Yet Wild
Join Date: Oct 2008
Posts: 35
|
Re: Installing spring stiffener from ebay?
the bolt that goes horizontally in relation to the ground that mounts it to the frame? I assume i need to support the frame right?
|
|
|
|
|
10-06-2008, 10:11 PM
|
#5 |
|
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Installing spring stiffener from ebay?
Welcome to the forum nurserob.....................
|
|
|
|
|
10-08-2008, 10:37 AM
|
#6 | |
|
Getting Wild
Join Date: Jun 2008
Location: Gainesville, Ga
Posts: 76
|
Re: Installing spring stiffener from ebay?
Quote:
Jack up the rear of the cart and support the frame...When you remove the bolt ( yes the 3" one ) that will take the pressure off the spring. This will allow you to get the new spring added to the existing spring. Bill |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need help with installing lift kit! | Lifted Golf Carts | |||
| Installing new controller | Electric EZGO | |||
| HELP! Need help installing new dash | Electric EZGO | |||
| installing lights | Electric Club Car | |||
| Installing Light Kit G16 | Gas Yamaha | |||
Linear Mode
