06-15-2014, 08:27 PM | #1 |
Gone Wild
Join Date: Mar 2013
Location: Ottawa, ontario, Canada
Posts: 292
|
Madjax lift kits
Have any of you bought a lift kit from madjax? If so can you tell me what you think? It's an a-arm lift. I want to go 6 inch. Any input is good. How did the install go? How did it ride after?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-15-2014, 09:45 PM | #2 |
Not Yet Wild
Join Date: Oct 2010
Location: illinois
Posts: 32
|
Re: Madjax lift kits
Got one on my 04 ds. Had it put on but I like it. Good travel and not too stiff a ride
|
06-16-2014, 07:01 PM | #3 |
Gone Wild
Join Date: Mar 2013
Location: Ottawa, ontario, Canada
Posts: 292
|
Re: Madjax lift kits
What size tire are you running?
|
06-17-2014, 06:05 AM | #4 |
Not Yet Wild
Join Date: May 2013
Location: Brighton, MI
Posts: 69
|
Re: Madjax lift kits
I have the exact lift kit you are looking at installed on my 2000 CC DS FE290. The install went fairly easy. Couple of things I noticed. The spring is real close to the bolt, so it is a little bit of a pain getting a wrench on it to get it to mount to the frame. Make sure you have your open end wrenches around :-) Also, the bolts going up to what we would normally refer to the king pin you definitely need to lock tite. The bottom ones are the ones to keep an eye on, they are the ones that will like to back out. Other than that, really nice lift kit and I like it a lot. Oh yeah, almost forgot, if you haven't replaced your tie rod ends, 3 of them, now is the time to do it.. They are cheap enough and I found it to be a good thing to do at this time anyway.
|
06-17-2014, 03:49 PM | #5 |
Not Yet Wild
Join Date: Oct 2010
Location: illinois
Posts: 32
|
Re: Madjax lift kits
I am running 22 x 10.50 x 12 s on it now. May go up to 23 s later
|
06-18-2014, 07:14 PM | #6 |
Gone Wild
Join Date: Mar 2013
Location: Ottawa, ontario, Canada
Posts: 292
|
Re: Madjax lift kits
Can you guys take a measurement for me please? I picked up some 4 wheeler rims and tires for really cheap. They are 24x9x11 and 24x8x12. Do you think they will fit with that set up. Do you think I will need spacers for the rims? I am really hoping that they will fit.
|
06-18-2014, 09:44 PM | #7 |
Not Yet Wild
Join Date: Oct 2010
Location: illinois
Posts: 32
|
Re: Madjax lift kits
Bolt pattern is different o the wheels and 24's will rub
|
06-18-2014, 10:12 PM | #8 | |
Not Yet Wild
Join Date: Jul 2011
Location: Thumb of MI
Posts: 60
|
Re: Madjax lift kits
Quote:
Just installed mine with the same issues you saw. we will see. |
|
06-19-2014, 08:26 AM | #9 |
Not Yet Wild
Join Date: May 2013
Location: Brighton, MI
Posts: 69
|
Re: Madjax lift kits
1/4" wider in front is what I set it to. Oh yeah, the other thing I did was put the nut on the bottom near the spring, otherwise I noticed that the bolt and nut might hit the top arm when it travels down. Doing it this way allows the arm at the top full travel without hitting the nut and bolt.
|
06-19-2014, 08:35 AM | #10 |
Not Yet Wild
Join Date: Jul 2011
Location: Thumb of MI
Posts: 60
|
Re: Madjax lift kits
Also take a measurement and make sure the front lift assembly is square before tightening the 4 bolts down.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone using a madjax lift | Electric Club Car | |||
Madjax 3.5 Lift kit | Electric Club Car | |||
Madjax or jakes A arm lift? | Electric Club Car | |||
madjax a-arm lift squeaking?? | Lifted Golf Carts | |||
Lift Kits - Lift not same in Rear...why? | Gas Club Car |