Columbia ParCar Lift Installed

BareProductions

I lifted the back of my cart about 2" over the weekend. I used similar spacers to what Jeggers came up with. Actually pretty easy to weld up. I used 3.5" OD tube from Metals Depot along with some other odds and ends I had around (but easily avail from Lowes or similar). Installation was simple, just disconnect the shock, jack the cart off the springs, and pop the spacers in. You'll also need to lower the shock mount 2" to keep full range of motion with the lift.
This gets the cart high enough to mount 20" tires but not require any modification for engine clearance. The front is already high enough and has enough clearance for 20" wheels.
Any questions let me know!

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

ts5089

That looks cool, where'd you get the tires and wheels? Didn't have to lift the front at all?
Thanks,
MIKE

BareProductions

Hey Mike,

Got the wheels and tires on ebay...clearance item from rockytopcarts.
8x7 steel wheels w/ (2+5 Offset), 20x10-8 Desert Fox All Terrain Tires.

The wheel offset is important...don't think these would fit around the spindle and rear diff on non-offset wheels.

Yeah I didn't do anything to the front, but there was already alot of space up there due to the body style. I doubt any previous owners had done anything either as the back was def stock and cart was level prior to lift mods.