Painting the frame

Xtreme Cartz · 06-23-2007, 03:44 PM

Last year I tore down my 00 EZGO Workhorse to rebuild it. I wire wheeled the frame to get rid of any rust and loose paint; then resprayed it with a few cans of Rustoleum rattle can junk. Anyway that is as far as I have gone with this cart since last October because some other projects took priority. Now I have an engine for it and almost enough money to continue on with rebuilding the good ole horse. The paint hasn't held up to well in storage, its already scratching off. I want to coat it with rattle can bed line to insure more durability. What's the best way to go about applying this stuff? I really don't want to spray over the unstable Rustoleum because won't it just peal off?

NO NO NO E-Z-GO! · 06-23-2007, 06:12 PM

The bedliner seems to be more like a rubber, so once you get it all the way around the frame, it probably can't/won't come off.

Go have it done at a Line-X place.

Xtreme Cartz · 06-23-2007, 09:18 PM

I dont have $600 to spend on that. But it would be cool!

NO NO NO E-Z-GO! · 06-23-2007, 09:21 PM

I forget what the stuff is called, but it's in a sort-of plain white can and says "Rubberized Under Coating." That stuff is some GOOD stuff. It doesn't cure hard like the bedliner will, but it is flexible and is about the best stuff I have came across.

JUST REMEMBERED! It's made by MAR-HYDE which is made by Bondo.

Xtreme Cartz · 06-23-2007, 09:22 PM

Do you know where I could pick up a few cans of that stuff?

NO NO NO E-Z-GO! · 06-23-2007, 09:25 PM

Try Napa, they usually have it.

Here is a link of what to look for, and apparently it's in a red can.
http://www.bondo.com/catalog_item.asp?itemNbr=484

It's not too terribly expensive either. You could do the whole cart with about 4-6 cans I'd think.

caddymankc · 06-23-2007, 09:26 PM

napa has undercoating atleast around here in pa

caddymankc · 06-23-2007, 09:27 PM

you posted faster than me and with better punctuation to

NO NO NO E-Z-GO! · 06-23-2007, 09:28 PM

I have been thinking of doing my Club Car frame in it when I do my 21hp swap, I like the shiny aluminum frame, but I want something DIFFERENT. I put that stuff on a piece of plyboard, and it catches all the water that comes off my roof right on the edge and hasn't warped yet.

Xtreme Cartz · 06-23-2007, 09:46 PM

Thanks that looks like good stuff. So do you think a good wire wheeling on the frame should do it or spray it with out doing prep work? The frame is very clean but I don't trust the rustoleum for rust protection down the road.

06-23-2007, 03:44 PM	#1
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964	Painting the frame Last year I tore down my 00 EZGO Workhorse to rebuild it. I wire wheeled the frame to get rid of any rust and loose paint; then resprayed it with a few cans of Rustoleum rattle can junk. Anyway that is as far as I have gone with this cart since last October because some other projects took priority. Now I have an engine for it and almost enough money to continue on with rebuilding the good ole horse. The paint hasn't held up to well in storage, its already scratching off. I want to coat it with rattle can bed line to insure more durability. What's the best way to go about applying this stuff? I really don't want to spray over the unstable Rustoleum because won't it just peal off?
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964

06-23-2007, 06:12 PM	#2
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 5,074	Re: Painting the frame The bedliner seems to be more like a rubber, so once you get it all the way around the frame, it probably can't/won't come off. Go have it done at a Line-X place.

06-23-2007, 09:18 PM	#3
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964	Re: Painting the frame I dont have $600 to spend on that. But it would be cool!
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964

06-23-2007, 09:21 PM	#4
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 5,074	Re: Painting the frame I forget what the stuff is called, but it's in a sort-of plain white can and says "Rubberized Under Coating." That stuff is some GOOD stuff. It doesn't cure hard like the bedliner will, but it is flexible and is about the best stuff I have came across. JUST REMEMBERED! It's made by MAR-HYDE which is made by Bondo.

06-23-2007, 09:22 PM	#5
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964	Re: Painting the frame Do you know where I could pick up a few cans of that stuff?
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964

06-23-2007, 09:25 PM	#6
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 5,074	Re: Painting the frame Try Napa, they usually have it. Here is a link of what to look for, and apparently it's in a red can. http://www.bondo.com/catalog_item.asp?itemNbr=484 It's not too terribly expensive either. You could do the whole cart with about 4-6 cans I'd think.

06-23-2007, 09:26 PM	#7
caddymankc WILD Join Date: May 2007 Location: in my bronco,pa Posts: 1,188	Re: Painting the frame napa has undercoating atleast around here in pa

06-23-2007, 09:27 PM	#8
caddymankc WILD Join Date: May 2007 Location: in my bronco,pa Posts: 1,188	Re: Painting the frame you posted faster than me and with better punctuation to

06-23-2007, 09:28 PM	#9
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 5,074	Re: Painting the frame I have been thinking of doing my Club Car frame in it when I do my 21hp swap, I like the shiny aluminum frame, but I want something DIFFERENT. I put that stuff on a piece of plyboard, and it catches all the water that comes off my roof right on the edge and hasn't warped yet.

06-23-2007, 09:46 PM	#10
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964	Re: Painting the frame Thanks that looks like good stuff. So do you think a good wire wheeling on the frame should do it or spray it with out doing prep work? The frame is very clean but I don't trust the rustoleum for rust protection down the road.
Xtreme Cartz Gone Wild Join Date: Dec 2006 Posts: 964

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode