lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-01-2015, 09:32 PM   #1
Not Yet Wild
 
Join Date: Dec 2014
Posts: 6
Default What rivet kit should I use

I am new to carts and I have a ezgo st sport 11 and I'm going to be taking it apart to paint it. I was wondering if anyone knew if there is a rivet kit I can buy so I can put it back together? It has the urothane front and the metal body Also I am wondering what parts cosmetic wise will fit on it such as a windshield and such.the cart also has the bed removed and a seat put in its place. I'm also wanting to put some tail lights on it I'm hoping the plastic fenders will hold the lights. Any help will be appreciated image.jpg
Bolweevle is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-01-2015, 09:36 PM   #2
Gone Wild
 
kgsc's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 6,464
Default Re: What rivet kit should I use

Ezgo part 608456 body rivet kit is the replacement but the rivets for the lower body use a 1/4 inch rivet gun. The rest are 3/16.
kgsc is offline   Reply With Quote
Unread 07-02-2015, 02:09 PM   #3
Not Yet Wild
 
Join Date: Dec 2014
Posts: 6
Default Re: What rivet kit should I use

thank you so much kgsc

do you know if a regular txt windshield will fit the st sport II
Bolweevle is offline   Reply With Quote
Unread 07-02-2015, 03:07 PM   #4
Gone Wild
 
kgsc's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 6,464
Default Re: What rivet kit should I use

To be honest I can't say 100%. Some windshields have slots cut in them to go around the rubber bushings on the uprights. Some just sit on top. I have put the ones with the slot on top of the bushings with the ST cowl to clear but sometimes the windshield hits the roof. If you add a 1/2 inch spacer like the ones already there it will usually clear. Post some measurements and I will look at mine as well I am sure others will also.
kgsc is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
manual rivet gun? Electric EZGO
Body rivet ???? Electric EZGO
Body rivet - where does this go? Electric EZGO
rivet kit for ezgo On Road Golf Carts!
Pop Rivet Golf Carts and Parts


All times are GMT -5. The time now is 03:20 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.