03-06-2016, 05:38 PM | #1 |
Not Yet Wild
Join Date: Dec 2012
Posts: 3
|
Ez go workhorse 800
2000 ez go workhorse 800 with robins 295cc.
I need some help on my ignition system. I've got spark on only one side of the coil. Does this mean the coil is bad or could something else cause this. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-07-2016, 08:54 PM | #2 |
Gone Wild
Join Date: Jun 2009
Location: Oregon
Posts: 230
|
Re: Ez go workhorse 800
Check the spark plug wire of the non firing spark plug on where it connects to the coil. The coil has a threaded stud that the wire "screws" onto. Lefty loosy/righty tighty. Both plugs will fire at the same time during normal operation. Often this connection gets wet and the spark plug cable will corrode. Clean or replace with a wire core plug wire as needed.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZ GO Workhorse Top | Gas EZGO | |||
workhorse will not run | Gas EZGO | |||
My workhorse | Members Rides | |||
1999 workhorse 1200 or 2006 workhorse 800, which one? | Gas EZGO | |||
Workhorse ID | Gas EZGO |