|
|||||||
| Notices |
| Ezgo Gas Tech Resource info, wiring diagrams and how to's for Gas powered EZGO golf carts |
|
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#101 |
|
Goin Nutz =)~
Join Date: Apr 2008
Location: Wichita, Kansas
Posts: 520
|
I just installed my 1" shorter belt and it makes a big difference. Along with the govenour adjustment the "seat of the pants" feeling is great. Top end is way up and out of the hole is much better. Thanks for the tips!
|
|
|
|
|
|
|
|
#102 |
|
Not Yet Wild
Join Date: Jun 2008
Location: Austin Minnesota
Posts: 49
|
I think this post answers my question, but I will ask anyways. Will installing a 1" shorter belt hurt my top end speed?
|
|
|
|
|
#103 |
|
Born Wild
Join Date: Mar 2007
Location: South Carolina
Posts: 2,541
|
|
|
|
|
|
#104 |
|
Getting Wild
Join Date: Jun 2008
Location: Sac, CA
Posts: 138
|
Sorry to bring this long exhausted thread back to life. But I just thought I would put the Napa part number question to rest as well...
http://www.napaonline.com/NOLPPSE/(S...98_0201089887# |
|
|
|
|
#105 |
|
Getting Wild
Join Date: Dec 2007
Posts: 115
|
you might want to fix the link. it must have been a search list and now it doesn't show anything.....the mystery remains.
I went to my local EZGO dealer and they looked up the belt for my cart and the book said it was part 27077-G02 which is the second belt listed. I went ahead an bought it ($41 ouch). When I removed the existing belt you could see the new belt was a little wider and a little shorter. Put the belt on and now it can do some things it couldn't do before. has more low end torque! |
|
|
|
|
#106 |
|
Getting Wild
Join Date: Apr 2008
Location: St. George, SC
Posts: 100
|
use that link and then go to Partspro SE on the left side. There you can look thru the belts that Napa has.
|
|
|
|
|
#107 |
|
Getting Wild
Join Date: Jun 2008
Location: Sac, CA
Posts: 138
|
I can't fix the link. don't have edit privvy.
Any way - do like sccowboy said and then the full part number is NBH6098 |
|
|
|
|
#108 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 9
|
Installed the 1" shorter belt on mine yesterday and it has a lot more get up and go.....can stop on a hill and start out with no problems now....thanks ruredy
|
|
|
|
|
#109 |
|
Not Yet Wild
Join Date: Jul 2008
Posts: 3
|
Ruredy -
What was the yamaha belt you were referring to in the starting post, I need a belt that will allow me to pull a Jet Ski up a boat ramp, The belt I got now is very loose and is able to touch the frame on the bottom, this cart is vverry slow to start but pick ups speed later. (Used cart that was given to me) EZGO 4cycle OHC GXT 804 D Marathon - New Project for me Serial # A36178 Manufacturing Code A1396 - Means this is a 1996 ? Robin Engine EH29C |
|
|
|
|
#110 |
|
Not Yet Wild
Join Date: Jul 2008
Location: Indiana
Posts: 8
|
I installed the shorter belt on a 85 Ez Go now the cart seems to have a slower pickup like the belt is slipping. It also now has a light squeal when starting and seems to lurch while starting. Any suggestions on whats wrong?
![]() |
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Belt Size for a 28 degree clutch. | Gas EZGO | |||
| Modify Driven Clutch | Gas Yamaha | |||
| Driven clutch problem | Gas EZGO | |||
| 28 degree clutch question | Gas EZGO | |||
| need a good used driven clutch 94 up ezgo | Golf Carts and Parts | |||