Shorter Belts and 28 degree driven clutch

Hermie · 01-28-2008, 09:54 AM

I am trying to covert my clutch in my 1992 marathon 4 stroke to a 28 degree clutch and I am having trouble finding the parts. They want to sell me the whole clutch and I just want the cam and buttons to covert my.

According to BU forums I need
BU seemed lost and wanted me to buy the whole clutch

1 - 72329-go1 - cam
3 - 72324-go1 - buttons

If anyone can help me find these without having to buy the whole clutch please let me know where and how much?

also want to order the yamaha belt while I am at it 39" blt yao 1339

Thanks
Brian

ruredy · 01-28-2008, 10:58 AM

Have you talked to any local ezgo dealers in your area, they should be able to get you those parts with no problems. I get the feeling BU only does whats best for BU, they make a bunch off of those clutches so it's in their best interest to not sell the parts.

tbolt · 02-04-2008, 07:35 PM

Bingo!!!!!!!!

Hermie · 02-04-2008, 09:09 PM

I ordered them last week
just waiting for them to get them and ship them to me
Thanks

porkchop · 02-05-2008, 11:27 PM

Hey Hermie,were did you order your parts from for the clutch? I think that I will try to do the same,change over to a 28 degree clutch. Thanks Porkchop.

Hermie · 02-06-2008, 03:07 AM

lake erie carts

1-800-276-0909

frogger812 · 02-20-2008, 06:38 PM

I need a new drive belt for my 91 ezgo. what size belt do I need????? I think I what a shorter belt for the low end

thanks collin

ruredy · 02-20-2008, 10:38 PM

Quote:

Originally Posted by frogger812

I need a new drive belt for my 91 ezgo. what size belt do I need????? I think I what a shorter belt for the low end

thanks collin

Your cart already has the shortest ezgo belt, I believe if your wanting to try that your going to need the yamaha belt. Someone has posted about that in this thread already, Shorter Belt?. check it out.

porkchop · 02-21-2008, 04:33 PM

Hey frogger I have a 91 4-stroke as well and I run a Yamaha 85 newer belt on mine. It is 39.5 long and 1.25 wide and I love it. But I have also listened to the others here on BGW and ordered my 28 degree parts for the clutch. They ran me $62 and some change. I going to give them a try and I'll let you know the results. Have fun with your project.

mthrall · 03-12-2008, 06:13 PM

Ok I've got a question do you guys run the 28 degree clutch and the torque spring? I'm just trying to get my tall tired pig to run a little better and I need to figure out what I've got for the clutch parts right now.

01-28-2008, 09:54 AM	#31
Hermie Not Yet Wild Join Date: Nov 2007 Posts: 57	Re: Shorter Belts and 28 degree driven clutch I am trying to covert my clutch in my 1992 marathon 4 stroke to a 28 degree clutch and I am having trouble finding the parts. They want to sell me the whole clutch and I just want the cam and buttons to covert my. According to BU forums I need BU seemed lost and wanted me to buy the whole clutch 1 - 72329-go1 - cam 3 - 72324-go1 - buttons If anyone can help me find these without having to buy the whole clutch please let me know where and how much? also want to order the yamaha belt while I am at it 39" blt yao 1339 Thanks Brian
Hermie Not Yet Wild Join Date: Nov 2007 Posts: 57

01-28-2008, 10:58 AM	#32
ruredy Born Wild Join Date: Mar 2007 Location: South Carolina Posts: 2,541	Re: Shorter Belts and 28 degree driven clutch Have you talked to any local ezgo dealers in your area, they should be able to get you those parts with no problems. I get the feeling BU only does whats best for BU, they make a bunch off of those clutches so it's in their best interest to not sell the parts.

02-04-2008, 07:35 PM	#33
tbolt Gone Wild Join Date: Sep 2007 Location: Buckeye, Az Posts: 329	Re: Shorter Belts and 28 degree driven clutch Bingo!!!!!!!!

02-04-2008, 09:09 PM	#34
Hermie Not Yet Wild Join Date: Nov 2007 Posts: 57	Re: Shorter Belts and 28 degree driven clutch I ordered them last week just waiting for them to get them and ship them to me Thanks
Hermie Not Yet Wild Join Date: Nov 2007 Posts: 57

02-05-2008, 11:27 PM	#35
porkchop Not Yet Wild Join Date: Nov 2007 Location: Ozarks Posts: 17	Re: Shorter Belts and 28 degree driven clutch Hey Hermie,were did you order your parts from for the clutch? I think that I will try to do the same,change over to a 28 degree clutch. Thanks Porkchop.

02-06-2008, 03:07 AM	#36
Hermie Not Yet Wild Join Date: Nov 2007 Posts: 57	Re: Shorter Belts and 28 degree driven clutch lake erie carts 1-800-276-0909
Hermie Not Yet Wild Join Date: Nov 2007 Posts: 57

02-20-2008, 06:38 PM	#37
frogger812 Not Yet Wild Join Date: Jan 2008 Posts: 47	Re: Shorter Belts and 28 degree driven clutch I need a new drive belt for my 91 ezgo. what size belt do I need????? I think I what a shorter belt for the low end thanks collin
frogger812 Not Yet Wild Join Date: Jan 2008 Posts: 47

02-21-2008, 04:33 PM	#39
porkchop Not Yet Wild Join Date: Nov 2007 Location: Ozarks Posts: 17	Re: Shorter Belts and 28 degree driven clutch Hey frogger I have a 91 4-stroke as well and I run a Yamaha 85 newer belt on mine. It is 39.5 long and 1.25 wide and I love it. But I have also listened to the others here on BGW and ordered my 28 degree parts for the clutch. They ran me $62 and some change. I going to give them a try and I'll let you know the results. Have fun with your project.

03-12-2008, 06:13 PM	#40
mthrall Not Yet Wild Join Date: Mar 2008 Posts: 29	Re: Shorter Belts and 28 degree driven clutch Ok I've got a question do you guys run the 28 degree clutch and the torque spring? I'm just trying to get my tall tired pig to run a little better and I need to figure out what I've got for the clutch parts right now.
mthrall Not Yet Wild Join Date: Mar 2008 Posts: 29

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Belt Size for a 28 degree clutch.	Gas EZGO
Modify Driven Clutch	Gas Yamaha
Driven clutch problem	Gas EZGO
28 degree clutch question	Gas EZGO
need a good used driven clutch 94 up ezgo	Golf Carts and Parts