02-18-2017, 06:53 PM | #1 |
Gone Wild
Join Date: Mar 2016
Location: Brookings, SD
Posts: 216
|
Remove Broken Clutch
I made a clutch puller like the one pictured. As the other picture shows, I took a chunk out of the clutch. Since the clutch is already broken, what is the best way of removing the rest of it? I have a sawzall, die grinders, etc. so that is a posible way. I did watch a Youtube video where they hammered a pickle fork between the clutch and rearend. That looked like a good way to damage the rearend. Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-18-2017, 10:44 PM | #2 |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: Remove Broken Clutch
Remove the bolt,spray PB-Blaster inside the bolt hole & on shaft splines in rear of clutch then wait a day or so and see if it will come off,if not repeat the process.I had one awhile back that would not come off any other way I tried so I used my propane torch to heat it up on the inside of the bolt hole as a last resort;it did work without damaging anything else but I wouldn't recommend it to anyone .
|
02-19-2017, 10:43 AM | #3 |
Gone Wild
Join Date: Mar 2016
Location: Brookings, SD
Posts: 216
|
Re: Remove Broken Clutch
I been using PB BLaster in the bolt hole. I sprayed a bunch in and stuck a cork in the hole to keep it in. I will try the torch next and see if it does it. Thanks.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Broken brake return spring, bolt won't remove | Gas Yamaha | |||
Broken clutch can't remove | Gas Club Car | |||
broken accelerator cable how do i remove? | Gas EZGO | |||
how to remove clutch | Gas Club Car | |||
Speed control moutning plate/heatsink - remove broken bolts? | Electric EZGO |