|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-07-2017, 05:51 PM | #1 |
Gone Wild
Join Date: Aug 2016
Posts: 612
|
does anyone know what the ohm range for the solenoid on a 2010 Workhorse should be??
Trying to see if the solenoid is bad...I'm not getting any clicking from it when the pedal is pressed. Any help would be appreciated..thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-07-2017, 06:29 PM | #2 |
Gone Wild
Join Date: Apr 2015
Posts: 256
|
Re: does anyone know what the ohm range for the solenoid on a 2010 Workhorse should b
Check for voltage at the battery, 12v
then the ground and battery cable at the solenoid if nothing go on, check the inline fuse that feeds to the micro switch, usually a little plastic holder near the solenoid, then the micro switch/ before and after when the petal is pressed, then the solenoid at the field wires when the switch is pressed. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2010 EZGO TXT has limited range | Electric EZGO | |||
Governor Adjust on 2010 Ezgo Workhorse 1200G | Gas EZGO | |||
Compression range for 2001 Workhorse | Gas EZGO |