1996 Workhorse - 2 or 4 terminal Key Switch?

BurntClutch

Evenin' all.

Im in need of a new key switch, since my cart came with no key, and the wires are just jumped out. The existing one is a two terminal unit.

My cart also has lights, not sure if they were added on aftermarket or what, but they are using some sort of jumper harness around the key switch also so the two terminals would still work.

My question is that Im wondering if anyone knows what the terminal connections are for the 4 terminal key switch, and if it would simplify my wiring to install that instead of the 2 terminal.

Any ideas?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

All the carts use the same key (with few exceptions)
so likely a new key will work.

BurntClutch

Thanks Scotty.

I thought about that, but given how lousy the other electrical bits seem, I figure I should just replace it now to be on the safe side.

kgsc

Buy the correct switch with the 4 terminals.

BurntClutch

Well, thats why Im asking, because I want to get the correct switch. It almost looks like the lights were added after the fact, and Im not sure if the 4 terminal switch is correct for the way its wired up.

Any idea of the terminal configuration on the 4 terminal switch?

kgsc

Should be marked B and I for go and B1 and L for lights