04-19-2018, 03:57 PM | #1 |
Not Yet Wild
Join Date: Sep 2013
Posts: 27
|
90-91 ezgo question
I have a buddy who has either a 90 or 91 ezgo marathon with the 3pg 2 stroke motor he has the fuel pump that is remote instead if mounted on the motor like the 2pg. What my question is does anybody know what the size of the fitting is that screws into the vacuum hole on the bottom end for the fuel pump.
Thanks for any help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2018, 05:03 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: 90-91 ezgo question
6mm
|
04-19-2018, 05:56 PM | #3 |
Not Yet Wild
Join Date: Sep 2013
Posts: 27
|
Re: 90-91 ezgo question
6mm would you know the thread pitch?
|
04-19-2018, 06:09 PM | #4 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: 90-91 ezgo question
M6x1. It's the same as the banjo fitting for the oiler.
|
04-19-2018, 06:11 PM | #5 |
Not Yet Wild
Join Date: Sep 2013
Posts: 27
|
Re: 90-91 ezgo question
Neither one of us have a oiler we mix our gas. And his cart is to far away for me to pull his fitting and check it.
|
04-19-2018, 06:13 PM | #6 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: 90-91 ezgo question
My oiler hole has a plug in it. It's 6x1
|
04-25-2018, 03:38 PM | #7 |
Not Yet Wild
Join Date: Sep 2013
Posts: 27
|
Re: 90-91 ezgo question
M6 is going to be too big under my fuel pump the hole for vacuum and pressure seemed to smaller then 1/4 inch. Not is that 1/4 od thread?
|
04-25-2018, 06:14 PM | #8 |
Not Yet Wild
Join Date: Sep 2013
Posts: 27
|
Re: 90-91 ezgo question
Are you saying the thread is 1/4 inch od ? Im thinking mine is smaller
|
04-25-2018, 07:43 PM | #9 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: 90-91 ezgo question
I have a 2pg. My oiler, and fuel pump holes are 6mm. I don't know why the 3pg would be different. Maybe they changed it, maybe they didn't.
6mm is .236". Look at this chart to see what your options are. https://www.ebay.com/i/140302187323?chn=ps |
04-29-2018, 03:31 PM | #10 |
Not Yet Wild
Join Date: Sep 2013
Posts: 27
|
Re: 90-91 ezgo question
My motor is a 2pg my oiler hole is on 1/8 inch round if that
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo pds question | Electric EZGO | |||
95 ezgo question | Electric EZGO | |||
EZGO PC-956 F&R Question | Electric EZGO | |||
got a question about my EZGO | Members Rides | |||
EZGO XI-500 question | Electric EZGO |