Gas ezgo work horse no power to the celonide

Dcdean · 06-02-2018, 03:38 PM

I was using the cart the other day . Went to start it day or two later won’t crank, though it was celonide so put new one on still no click check the foot pedal switch under floor check ok I get the reverse buzzer when shift tu reverse. I have power at the switch but no power to the foot pedal switch. I have 12volt on celonide when jumping It cranks but I have no proper to coil . i should have 12 volt across the two small post across when I step on the pedal ? Its got me stump. it A 1998 ezgo work horse. This is my first time to post!

Spicyunicorn · 06-03-2018, 07:17 AM

Did you check the fuse

Dcdean · 06-03-2018, 07:43 AM

meimk · 06-03-2018, 08:35 AM

Check the small red wire near the shifter. Can't tell you how many times I've seen the spade terminals corrode to nothing. It's the same wire that feeds power to the reverse buzzer, but also branches to the pedal micro switch & ignition switch.

Dcdean · 06-03-2018, 02:06 PM

I have power on the red wire but when I check the red on the micro switch on the Pedro no power guess lambs a bronken wire thanks

Dcdean · 06-03-2018, 03:02 PM

Yes I have power

06-02-2018, 03:38 PM	#1
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8	Gas ezgo work horse no power to the celonide I was using the cart the other day . Went to start it day or two later won’t crank, though it was celonide so put new one on still no click check the foot pedal switch under floor check ok I get the reverse buzzer when shift tu reverse. I have power at the switch but no power to the foot pedal switch. I have 12volt on celonide when jumping It cranks but I have no proper to coil . i should have 12 volt across the two small post across when I step on the pedal ? Its got me stump. it A 1998 ezgo work horse. This is my first time to post!
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8

06-03-2018, 07:17 AM	#2
Spicyunicorn Gone Wild Join Date: Jun 2015 Location: NW Iowa Posts: 1,669	Re: Gas ezgo work horse no power to the celonide Did you check the fuse

06-03-2018, 07:43 AM	#3
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8	Re: Gas ezgo work horse no power to the celonide Yes
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8

06-03-2018, 08:35 AM	#4
meimk Gone Wild Join Date: Jun 2011 Location: Northern Indiana Posts: 2,823	Re: Gas ezgo work horse no power to the celonide Check the small red wire near the shifter. Can't tell you how many times I've seen the spade terminals corrode to nothing. It's the same wire that feeds power to the reverse buzzer, but also branches to the pedal micro switch & ignition switch.

06-03-2018, 02:06 PM	#5
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8	Re: Gas ezgo work horse no power to the celonide I have power on the red wire but when I check the red on the micro switch on the Pedro no power guess lambs a bronken wire thanks
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-03-2018, 03:02 PM	#6
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8	Re: Gas ezgo work horse no power to the celonide Yes I have power
Dcdean Not Yet Wild Join Date: May 2018 Posts: 8

Similar Threads
Thread	Forum
Ergo work horse 98 gas won run no power to switch under floor. B	Electric EZGO
WTB Ezgo work horse lift kit	Golf Carts and Parts
04 ezgo work horse parts	Golf Carts and Parts
ezgo gas work horse died	Gas EZGO
99 ezgo work horse	Big Block Talk!