|
08-16-2018, 07:10 AM
|
#1 |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,213
|
Rivits
Anyone know where I can buy and what size rivits I need to reinstall the dash on 1999 workhorse ? . I removed it to replace oil light and ign switch and want it back like it was. Thanks.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-16-2018, 09:09 AM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2018
Location: Richmond, VA
Posts: 31
|
Re: Rivets
Don't know what size you need, but if they are countersunk you won't find any at your hardware store.
I've always bought rivets from McMaster-Carr https://www.mcmaster.com/#rivets/=1e6j99w |
|
|
|
|
08-16-2018, 10:17 AM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2018
Location: Richmond, VA
Posts: 31
|
Re: Rivits
As a follow up, you can find pop rivets at any hardware store, Lowe’s or Home Depot in a variety of sizes. Likely it’ll be 3/16” or 1/8” x whatever length you need. If you have one that you drilled out you can use that to size what you need. You’ll also need a pop rivet tool. They’re cheap and handy for other projects.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Re assembly without rivits | Gas EZGO | |||
| body rivits or not? | Gas EZGO | |||
| Push rivits | Gas Yamaha | |||
Linear Mode
