lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-04-2019, 05:16 PM   #11
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 5,450
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

Also noticed the secondary clutch isn't moving much or any.
raydhd is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-06-2019, 06:25 PM   #12
Not Yet Wild
E-Z-GO
 
Join Date: May 2013
Location: East Tennessee
Posts: 17
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

Looks like the neutral lock is engaged on the rear axle. Pull it out, rotate it 180 degrees, and try it out.

Gene
gened4288 is offline   Reply With Quote
Unread 01-06-2019, 06:26 PM   #13
Not Yet Wild
 
Join Date: Oct 2017
Posts: 34
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

Thanks all, Iíll check it out this Friday and report back what I find. Thanks for the quick replies


Sent from my iPhone using Tapatalk
nigilcv is offline   Reply With Quote
Unread 01-06-2019, 06:33 PM   #14
Not Yet Wild
E-Z-GO
 
Join Date: May 2013
Location: East Tennessee
Posts: 17
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

Neutral lock.jpg

Like this
gened4288 is offline   Reply With Quote
Unread 01-07-2019, 10:46 AM   #15
Not Yet Wild
 
Join Date: Oct 2017
Posts: 34
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

Thanks, appreciate the diagram!


Sent from my iPhone using Tapatalk
nigilcv is offline   Reply With Quote
Unread 01-13-2019, 06:40 PM   #16
Not Yet Wild
 
Join Date: Oct 2017
Posts: 34
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

Pulled out the neutral lock switch and still nothing. Pulled on the cables/tried to tighten and more of the same. Not seeing anything moving with or without tires, on the ground and jacked up. Completely at a loss...


Sent from my iPhone using Tapatalk
nigilcv is offline   Reply With Quote
Unread 01-13-2019, 06:59 PM   #17
Not Yet Wild
E-Z-GO
 
Join Date: May 2013
Location: East Tennessee
Posts: 17
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

When you move the F/R selector, do the cables at the selector move? If they do, what about at the axle end? What happens if you try to manually push the selector at the axle (it’ll be hard to move, but it should move).
gened4288 is offline   Reply With Quote
Unread 01-13-2019, 07:02 PM   #18
Not Yet Wild
 
Join Date: Oct 2017
Posts: 34
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

The front cables move a lot, whereas the rear seem to be not traveling as much. The sector isnít moving anymore than it was in the video. Iíve tried moving the selector manually and have the same results. Iím debating giving the hubs a tap to see if the brakes are lock up at all.

The odd thing is that when the brakes are released, I can move in any direction (f/r) no matter what is selected. I do here a slight grind when this happens and there isnít any friction when pushing or pulling the cart manually.


Sent from my iPhone using Tapatalk
nigilcv is offline   Reply With Quote
Unread 01-13-2019, 07:13 PM   #19
Not Yet Wild
E-Z-GO
 
Join Date: May 2013
Location: East Tennessee
Posts: 17
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

Quote:
Originally Posted by nigilcv View Post
The front cables move a lot, whereas the rear seem to be not traveling as much. The sector isnít moving anymore than it was in the video. Iíve tried moving the selector manually and have the same results. Iím debating giving the hubs a tap to see if the brakes are lock up at all.

The odd thing is that when the brakes are released, I can move in any direction (f/r) no matter what is selected. I do here a slight grind when this happens and there isnít any friction when pushing or pulling the cart manually.
With the neutral lock engaged, you should be able to push the cart regardless of shifter position. Are you sure the pin-looking thing (for lack of an official term!) moved forward when you released the neutral lock? Make sure itís not still making contact with the differential. As for the brakes, if you lift the rear of the cart off the ground, you should be able to rotate the wheels by hand provided the cart is in neutral.
gened4288 is offline   Reply With Quote
Unread 01-13-2019, 07:14 PM   #20
Not Yet Wild
 
Join Date: Oct 2017
Posts: 34
Default Re: Added shorter belt to 97 TXT and now no forward or reverse

I will check and see if the pin is still slightly engaged and then see if I can move the wheels by hand. Thanks all for the ideas and support.


Sent from my iPhone using Tapatalk
nigilcv is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
shorter belt Gas EZGO
Shorter belt Gas EZGO
replacing alternator/starter belt with shorter belt Gas Club Car
Shorter belt ? Gas Club Car
Shorter belt Gas EZGO


All times are GMT -5. The time now is 03:58 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.