|
11-25-2018, 09:04 PM
|
#1 |
|
Nincompoop village idiot
 Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
OEM EZGO parts?
I have a 2007 workhorse ST350 that needs valve seals. Doesnt smoke while driving at all. But, if you are cruising at speed and let off the gas to coast to a stop, it will blow a puff of smoke when you first go. Same for first start after sitting a couple days.
But... if I have to pull the motor apart to do the valve seals I'm going to rebuild the entire motor so everything is new and fresh. Are there any site sponsors that sell the OEM parts? (Valve seals, bearings, rings, gaskets, etc) or is there somewhere else online I can get OEM parts? I dont like to rebuild motors with aftermarket parts. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-26-2018, 01:07 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2010
Location: Woodstock,GA
Posts: 1,088
|
Re: OEM EZGO parts?
Think your right on there looking for OEM
 Don't know if you can get them that are not CHINA  Think I would stay with your used OEM rods before installing new CHINA junk. |
|
|
|
|
11-26-2018, 03:20 PM
|
#3 |
|
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: OEM EZGO parts?
Didn't have any luck online. I searched everywhere and couldn't find what I need. Even from the subaru industrial parts.com website directly. They skip right over the EH352 series... I'm guessing they must have restricted these parts for ezgo dealers.
So, I just went to my local ezgo dealer and they had everything in stock. Not replacing the rods... Really everything in the motor is fine except the valve seals. It runs great, very strong, no noise, knock, etc. It just blows a puff of smoke when you first start driving. So I got everything to basically refresh the motor and make the smoking stop. Should be good as new here soon :) |
|
|
|
|
11-26-2018, 03:45 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2010
Location: Woodstock,GA
Posts: 1,088
|
Re: OEM EZGO parts?
Mine still does what yours is,
coast down a hill, then back to gas it will puff. I replaced the valve seals when I rebuilt it, but not the valve guides. just something to think about  |
|
|
|
|
11-26-2018, 03:51 PM
|
#5 |
|
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: OEM EZGO parts?
yeah, or just worn intake valves. they're pretty soft. They have those and the guides and everything in stock too so once I get it apart i'll inspect everything closely. Anything that needs replaced will get replaced. Now I just gotta push the gator that's waiting for parts out of the way and move the ezgo in lol
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 91 ezgo parts | Golf Carts and Parts | |||
| Ezgo 350 engine and parts out of 1992 Ezgo Marathon | Golf Carts and Parts | |||
| EZGO Parts | Golf Carts and Parts | |||
| F.S. Ezgo parts and yamaha parts | Golf Carts and Parts | |||
| EZGO parts | Golf Carts and Parts | |||
Linear Mode
