lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-02-2019, 04:14 AM   #11
Not Yet Wild
E-Z-GO
 
Join Date: Jul 2017
Location: Quakertown,Pa
Posts: 34
Default Re: EC25-3PG seal replacement

Wow, what a transformation. Looks great. Hopefully, she runs just as well.

Keep us posted.
MICKEYMOTORMOUNT is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-03-2019, 10:53 PM   #12
Not Yet Wild
E-Z-GO
 
Join Date: Jan 2019
Location: Bulverde, TX
Posts: 13
Default Re: EC25-3PG seal replacement

We'll I've been driving it around the neighborhood. No more seal leaks.

The more I read on this site, the more I learn.

I now know that I've been mixing the fuel/oil ratio a little rich 100:1. I lean that out in the future.

I now know that the timing is full advanced(full clockwise). I'll back it off to the middle of the adjustment.

Here what I've done so far:
Removed engine
Cleaned exterior of engine
Cleaned fuel tank inside and out
Cleaned spark plug
Made new muffler hold down straps (2)
Lubed front grease fittings
New crank shaft/case seals (2)
New air filter
New carburetor
New fuel filter
New fuel lines
New ignition switch
New starter solenoid/relay
New WalMart 24 mth group 58 battery
New wood for seats (3)
New seat covers (tan)

I'm gonna check/lube the front wheel bearings and change the rear differential fluid. When I take the engine back out to adjust the timing I'll look inside the engine clutch. It is working fine but is noisy?

What's the correct spark plug # for the 2 stroke 3PG

What else?

Thanks
Don
donjetman is offline   Reply With Quote
Unread 02-04-2019, 12:56 AM   #13
Test before replacing
E-Z-GO
 
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 2,081
Default Re: EC25-3PG seal replacement

I forgot to mention it earlier. Look at your pictures after the flywheel is off. The timing on the 3pg doesn't get centered. If you put it back to original, you are good to go.
cart around is online now   Reply With Quote
Unread 02-04-2019, 10:25 AM   #14
Not Yet Wild
E-Z-GO
 
Join Date: Jan 2019
Location: Bulverde, TX
Posts: 13
Default Re: EC25-3PG seal replacement

Quote:
Originally Posted by cart around View Post
I forgot to mention it earlier. Look at your pictures after the flywheel is off. The timing on the 3pg doesn't get centered. If you put it back to original, you are good to go.
I put it back like I found it. See pic below

The spark plug that's in it now is a Champion RL95YC, is this correct?

Gap is .030"

Here's is what it looks like after a 3 mile cruise. See pic

What do you think?
Attached Images
File Type: jpg DSCN0006.jpg (213.3 KB, 0 views)
File Type: jpg DSCN0010.jpg (80.3 KB, 0 views)
donjetman is offline   Reply With Quote
Unread 02-04-2019, 10:42 PM   #15
Not Yet Wild
E-Z-GO
 
Join Date: Jan 2019
Location: Bulverde, TX
Posts: 13
Default Re: EC25-3PG seal replacement

It takes a NGK BP5HS or Champion L92-YC. Found it in Chapter 20_S of the owner operation and service manual:

https://app.box.com/s/3habgxrtgz/file/626084125
donjetman is offline   Reply With Quote
Unread 02-05-2019, 06:52 AM   #16
Getting Wild
 
Join Date: Jun 2016
Posts: 91
Default Re: EC25-3PG seal replacement

Im not trying to hijack your thread but I was hoping somebody in here might be able to help me. I am having trouble finding new reeds for my 3pg motor and I was wondering if anybody had any ideas , leads, or knew of reeds from another application that would work
nwocart is offline   Reply With Quote
Unread 02-05-2019, 10:47 AM   #17
Perpetually confused.
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: GA
Posts: 1,103
Default Re: EC25-3PG seal replacement

Quote:
Originally Posted by LukeL View Post
On my first one I finally had to hang the engine by two metal bars screwed to the flywheel and beat the crankshaft until the engine fell on the grass. Not a good idea I know but it worked at the time!


Sent from my iPhone using Tapatalk


Your current one didn't go much easier if I recall... Both times you pulled the flywheel off
CP241 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
G1 Seal Replacement Now What Gas Yamaha
G16 Crank Seal Replacement Gas Yamaha
Not just crank seal replacement on G1 Gas Yamaha
Input Oil Seal Replacement Gas EZGO
g1 crank seal replacement Gas Yamaha


All times are GMT -5. The time now is 10:50 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.