lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-29-2019, 10:33 AM   #1
Not Yet Wild
 
Join Date: Sep 2019
Posts: 7
Default PCV Valve

I am completely rebuilding a stock Pre-MCI 295 Robins. I am at the process of putting the PCV valve back in and from the manual I have the "Never Style". My gasket kit has about 10 gaskets that could be used but I can't find which ones should be used. Before I rebuilt the engine, I was having trouble getting gas but that could of been from MULTIPLE sources, not necessarily vacuum. Can anyone tell me how the gaskets and plates should be aligned on the "newer model" in the picture? Many Thanks!! Mike
Attached Images
File Type: jpg PCV Valve.jpg (146.5 KB, 0 views)
miketravis26 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-29-2019, 11:29 AM   #2
Old School
 
trig123's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: West of Mayberry
Posts: 884
Default Re: PCV Valve

Two thick gaskets toward block, then metal plate with rectangle made on it on inside and thin gasket on opposite side. Then of course the nipple that hose goes to points up. Bolt her on
trig123 is online now   Reply With Quote
Unread 10-29-2019, 11:44 AM   #3
Not Yet Wild
 
Join Date: Sep 2019
Posts: 7
Default Re: PCV Valve

Thanks a lot Trig!! I really appreciate the info!
miketravis26 is offline   Reply With Quote
Unread 10-31-2019, 08:54 AM   #4
Not Yet Wild
E-Z-GO
 
Join Date: Oct 2019
Location: Southeast
Posts: 1
Default Re: PCV Valve

If I may ask in your thread... I purchased a poorly running GXT 801D w 295cc. Replaced fuel pump and filters. Set valves. Cleaned carb. Upon running its dumping fuel into the motor and gushing from the crankcase by way of the pcv. I thought float stuck, pulled cleaned lowered float a tiny bit. Back together still overfueling... I've ordered new carb, awaiting that. But, could my pcv have anything to do with it dumping that fuel?
Gstringer64 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
KF82 valve noise after stuck valve Gas Club Car
Valve tap Gas Club Car
briggs vtwin valve oil seal which valve Big Block Talk!
97 Ez-Go Valve kit Gas EZGO
valve job Gas Yamaha


All times are GMT -5. The time now is 12:48 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.