2003 TXT F/R shifter adjustment

1arunem · 11-04-2019, 08:32 AM

2003 TXT. Having issues with shift adjustment. When in forward and gas pressed, engine will rev up with a clicking noise from rear end as though it is not fully in gear.

I adjusted shift cable linkage at rear end but can't seem to find a sweet spot.
It either has the clicking noise in forward or if I adjust a bit the other way, it works fine in forward but clicks in reverse.

When this happens, if I let off gas after it revs up, it will 'clunk' and go into gear.

Ideas? Would adjusting linkage at shifter knob linkage help? I haven't tried that yet.

Thanks!

1arunem · 11-08-2019, 08:05 AM

Just bumping to see if anyone has any ideas. Thanks!

trig123 · 11-08-2019, 11:16 AM

You got the original drive belt or maybe a shorter one ?

1arunem · 11-08-2019, 01:46 PM

Honestly not sure. Will have to take it off and check.

trig123 · 11-08-2019, 07:03 PM

If you can roll it off easy then it has the standard belt.
Sometimes we put shorter belts on these carts where they take off better .
The downside is they sometimes make shifting it harder. Your cart (2003 ) has the one cable instead of the double cable and they normally never give any problems.
See if you can just roll that drive belt off without any problem and that might give us a clue. Turn that key off before you do anything though.

11-04-2019, 08:32 AM	#1
1arunem Gone Wild Join Date: Nov 2015 Posts: 308	2003 TXT F/R shifter adjustment 2003 TXT. Having issues with shift adjustment. When in forward and gas pressed, engine will rev up with a clicking noise from rear end as though it is not fully in gear. I adjusted shift cable linkage at rear end but can't seem to find a sweet spot. It either has the clicking noise in forward or if I adjust a bit the other way, it works fine in forward but clicks in reverse. When this happens, if I let off gas after it revs up, it will 'clunk' and go into gear. Ideas? Would adjusting linkage at shifter knob linkage help? I haven't tried that yet. Thanks!
1arunem Gone Wild Join Date: Nov 2015 Posts: 308

11-08-2019, 08:05 AM	#2
1arunem Gone Wild Join Date: Nov 2015 Posts: 308	Re: 2003 TXT F/R shifter adjustment Just bumping to see if anyone has any ideas. Thanks!
1arunem Gone Wild Join Date: Nov 2015 Posts: 308

11-08-2019, 11:16 AM	#3
trig123 Gone Wild Join Date: Sep 2009 Location: West of Mayberry Posts: 908	Re: 2003 TXT F/R shifter adjustment You got the original drive belt or maybe a shorter one ?

11-08-2019, 01:46 PM	#4
1arunem Gone Wild Join Date: Nov 2015 Posts: 308	Re: 2003 TXT F/R shifter adjustment Honestly not sure. Will have to take it off and check.
1arunem Gone Wild Join Date: Nov 2015 Posts: 308

11-08-2019, 07:03 PM	#5
trig123 Gone Wild Join Date: Sep 2009 Location: West of Mayberry Posts: 908	Re: 2003 TXT F/R shifter adjustment If you can roll it off easy then it has the standard belt. Sometimes we put shorter belts on these carts where they take off better . The downside is they sometimes make shifting it harder. Your cart (2003 ) has the one cable instead of the double cable and they normally never give any problems. See if you can just roll that drive belt off without any problem and that might give us a clue. Turn that key off before you do anything though.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
2003 EZGO TXT valve adjustment and oil leak.	Gas EZGO
gas ezgo shifter adjustment	Lifted Golf Carts
Fix for 2003+ EZGO Shifter Bracket Interference	Clone Engine Swaps
2004 TXT Shifter Cable Adjustment	Gas EZGO
89 2 stroke shifter adjustment	Gas EZGO