lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-14-2020, 04:51 PM   #21
lost in the woods
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: GA
Posts: 3,919
Default Re: Robin EH29C

Make sure the cam lobes are pointing down when you adjust. You'll have to rotate the engine over once to do the 2and cylinder.
CP241 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-14-2020, 05:12 PM   #22
Not Yet Wild
 
riperapart's Avatar
 
Join Date: Mar 2018
Posts: 22
Default Re: Robin EH29C

I always forget about good ol you tube. Hittin that now. Let yall know later!

Sent from my SM-N950U using Tapatalk
riperapart is offline   Reply With Quote
Unread 02-14-2020, 06:59 PM   #23
Gone Wild
 
trig123's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: West of Mayberry
Posts: 1,074
Default Re: Robin EH29C

The picture I included in post 17 shows how your lobe should be pointing ( down ) . 10 mm socket and remove the valve cover. Then just take a 10mm wrench and screwdriver.
You will know if these intakes are pulled into the head as soon as you remove the valve cover.
As Cartmaster said, count the amount of thread showing on the two middle valves compared to the other two.
trig123 is offline   Reply With Quote
Unread 02-14-2020, 07:44 PM   #24
Not Yet Wild
 
riperapart's Avatar
 
Join Date: Mar 2018
Posts: 22
Default Re: Robin EH29C

Thanks on my way home to check this out. First I'll stop at auto store to pick up oil and plugs. Do I use synthetic? 10w-30 or just 30w? Also are plugs pre gapped? What should gap be?

Sent from my SM-N950U using Tapatalk
riperapart is offline   Reply With Quote
Unread 02-14-2020, 10:44 PM   #25
Gone Wild
 
trig123's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: West of Mayberry
Posts: 1,074
Default Re: Robin EH29C

Quote:
Originally Posted by riperapart View Post
Thanks on my way home to check this out. First I'll stop at auto store to pick up oil and plugs. Do I use synthetic? 10w-30 or just 30w? Also are plugs pre gapped? What should gap be?

Sent from my SM-N950U using Tapatalk
I always use regular 10w30. Plugs gap at 030 . I would use the NGK BP4ES plugs and unless someone dropped them they are pre-set
trig123 is offline   Reply With Quote
Unread 02-14-2020, 11:16 PM   #26
Not Yet Wild
 
riperapart's Avatar
 
Join Date: Mar 2018
Posts: 22
Default Re: Robin EH29C

Ok from top to bottom...... top is .004 and this one won't adjust. I loosened nut and turned screw down and still no gap.

Sent from my SM-N950U using Tapatalk
riperapart is offline   Reply With Quote
Unread 02-14-2020, 11:30 PM   #27
Not Yet Wild
 
riperapart's Avatar
 
Join Date: Mar 2018
Posts: 22
Default Re: Robin EH29C

Update...... almost have to run screw to very top to fit .004

Sent from my SM-N950U using Tapatalk
riperapart is offline   Reply With Quote
Unread 02-15-2020, 12:07 AM   #28
Not Yet Wild
 
riperapart's Avatar
 
Join Date: Mar 2018
Posts: 22
Default Re: Robin EH29C

Here is the pic of that valve adjusted. I checked compression and now have 180psi on both cylinders. Is this valve going bad?

Sent from my SM-N950U using Tapatalk
riperapart is offline   Reply With Quote
Unread 02-15-2020, 12:10 AM   #29
Not Yet Wild
 
riperapart's Avatar
 
Join Date: Mar 2018
Posts: 22
Default Re: Robin EH29C

Trig.... I actually forgot to check gap according to picture you sent me. I followed a you tube video that showed to check under set screw. Am I good either way?

Sent from my SM-N950U using Tapatalk
riperapart is offline   Reply With Quote
Unread 02-15-2020, 12:20 AM   #30
Gone Wild
 
dirtyyoda77's Avatar
E-Z-GO
 
Join Date: Feb 2010
Location: Citrus Springs, FL
Posts: 400
Default Re: Robin EH29C

Valves are getting wore out with that much thread showing

It’s a common problem with these engines after being neglected

Just monitor them and run them drain all the oil out of the motor and fill it up with 1.5qt like mentioned before

I have a lifted cart and have to take my front wheels off and jack the back end up to get all the oil out of mine

But should run good after that
dirtyyoda77 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Robin eh29c camshaft Gas EZGO
Robin EH29C Parts Golf Carts and Parts
Robin eh29c 295cc Gas EZGO
Robin eh29c Gas EZGO
Smoking EH29C Robin Gas EZGO


All times are GMT -5. The time now is 07:26 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.