|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-21-2007, 06:33 PM | #1 |
Not Yet Wild
Join Date: Jun 2007
Posts: 45
|
EZGO Windshield Creation
Decided to create my own special design windshield for my 2005 EZGO. Ordered a 36" x 48" clear 1/4" plexiglass sheet and made a pattern of the size I wanted. Even made it curve up and over the hood of the cart. Note: the one piece design in picture.
Last edited by ezgotxtman; 09-21-2007 at 06:36 PM.. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2007, 07:44 PM | #2 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: EZGO Windshield Creation
NICE! It makes them look so much better when they co with the lines of the body.
|
09-21-2007, 08:09 PM | #3 | |
Gone Wild
Join Date: Dec 2006
Location: The Dark Side
Posts: 676
|
Re: EZGO Windshield Creation
Quote:
Ohh wait their it is looking great |
|
09-21-2007, 09:38 PM | #4 |
Gone Wild
Join Date: Feb 2007
Posts: 176
|
Re: EZGO Windshield Creation
Just my .02
In a few years, spider cracks will start forming around the mounting bolts. Caused by the flexing of the top struts. That is why so many use plastic channels. |
09-22-2007, 08:32 AM | #5 | |
Not Yet Wild
Join Date: Jun 2007
Posts: 45
|
Re: EZGO Windshield Creation
Quote:
Not this one Bubba, Each hole as a rubber grommet to prevent such. Remember I'm an old pro at this. |
|
09-23-2007, 03:28 PM | #6 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: EZGO Windshield Creation
It's still plastic and it still flexes. Over time, cracks are going to form. The grommets may help, but nothing is going to totally prevent it.
|
09-23-2007, 07:42 PM | #7 | |
Gone Wild
Join Date: Dec 2006
Location: The Dark Side
Posts: 676
|
Re: EZGO Windshield Creation
Quote:
What the heck do guys from WV understand anyhow..You all marry your neighbors and don't like dodges |
|
09-23-2007, 07:45 PM | #8 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: EZGO Windshield Creation
I AM NOT FROM W. VA.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!
|
09-23-2007, 07:55 PM | #9 |
Gone Wild
Join Date: Dec 2006
Location: The Dark Side
Posts: 676
|
Re: EZGO Windshield Creation
|
09-23-2007, 08:46 PM | #10 |
Not Yet Wild
Join Date: Jun 2007
Posts: 45
|
Re: EZGO Windshield Creation
NO NO No EZGO... I'll give you a report in several years. The holes for the 1/4" bolts are 3/4" dia. surrounded by a soft rubber grommet that cushions the stress from the flex. In a better term, it's a floating windshield... If it cracks, there is still a few 1/4" clear Plexiglas sheets left in the United States for the right dollar.
Keep in mind, I don't work for EZGO, but, I like to re-engineer their products. The "Tin Can" 295cc is one of them. Last edited by ezgotxtman; 09-24-2007 at 07:53 AM.. |