|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-26-2009, 07:07 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Avon, NY
Posts: 19
|
'79 EZGO complete rebuild
HI Ya'all Don't know if you caught my voltage thread, but figured out my starter/generator problem. A Bad crank bearing!!! Doesn't it figure!!! Armature was making very slight contact due to bad bearing, and shorting out whole system. Got engine out, top end off and I'm trying to seperate crank case. Does anyone know if and how, the windings come off the crank shaft? Rear bearing seems to be preventing me from seperation. Not sure what to do!
 Last edited by PINK PANTHER; 06-26-2009 at 07:30 PM.. Reason: add pics |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-27-2009, 06:04 AM
|
#2 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: '79 EZGO complete rebuild
I think you need a puller to get that off.
|
|
|
|
|
06-27-2009, 10:05 AM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Avon, NY
Posts: 19
|
Re: '79 EZGO complete rebuild
I've got a puller, but I wasn't sure if it was supposed to be pulled. I don't want to damage it, NLA I believe. Were you refering to the windings in pic #1, or the rear bearing in pic#3? In pic #2 you can see how far I got the case to seperate. I know what needs to be pulled!!!! Which side should I be concentating on? I haven't removed fuel pump, but I don't think that is an issue??
|
|
|
|
|
06-27-2009, 10:10 AM
|
#4 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: '79 EZGO complete rebuild
I don't know how it comes off but you probably need to find out. even the pullers for things on that engine are NLA.
 maybe someone will come along that knows about it. |
|
|
|
|
06-27-2009, 11:35 AM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Avon, NY
Posts: 19
|
Re: '79 EZGO complete rebuild
Jon, Thanks for your input!!
|
|
|
|
|
09-06-2009, 09:04 AM
|
#6 |
|
Not Yet Wild
Join Date: Sep 2009
Location: ILLINOIS
Posts: 8
|
Re: '79 EZGO complete rebuild
HELLO I just got my first golf cart and it was free
its a 1979 e-z-go same as yours was woundering how much luck have you had finding parts and manules for it? thanks Dave |
|
|
|
|
09-19-2009, 10:12 AM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Avon, NY
Posts: 19
|
Re: '79 EZGO complete rebuild
Sorry I took so long getting back to you! I haven't been able to get all the parts I need to assemble engine, cart is on the back burner right now. This website, and google searching are probably your best bet for parts and info. Hope this helps!!!
|
|
|
|
|
09-21-2009, 04:31 PM
|
#8 |
|
Not Yet Wild
Join Date: Aug 2009
Posts: 6
|
Re: '79 EZGO complete rebuild
Hope you find out how to get it off. If you do could send me some information. I have the same problem. If I get some will pass it on. GOOD LUCK!
|
|
|
|
|
09-21-2009, 10:24 PM
|
#9 |
|
Not Yet Wild
Join Date: Jun 2009
Location: Avon, NY
Posts: 19
|
Re: '79 EZGO complete rebuild
I did get the case apart. can't quite remember how though. I'll check it out tomorrow and post again! been awhile!!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| My EZGO 295 rebuild... | Gas EZGO | |||
| 2005 Precedent Complete rebuild...Need ideas | Electric Club Car | |||
| ezgo gas engine complete | Golf Carts and Parts | |||
| EZGO project 90% complete | Members Rides | |||
| Need Ezgo 350 11hp Complete. Will trade for Terra Toys Chrome 3 link | Golf Carts and Parts | |||
Linear Mode
