Snapped off driven clutch bolt update

shorepatrol · 07-17-2009, 06:35 PM

Ended up snapping off an EZ OUT in the shaft

After a half an hour and two dremel grinder bits I had it cleaned out enough to run a tap through it and install a factory bolt.

Sharp drill bits and a dremel save the day.

pizzamaker · 07-17-2009, 06:36 PM

Quote:

Originally Posted by shorepatrol

Ended up snapping off an EZ OUT in the shaft

After a half an hour and two dremel grinder bits I had it cleaned out enough to run a tap through it and install a factory bolt.

Sharp drill bits and a dremel save the day.

good job

tonyton · 07-17-2009, 08:24 PM

Quote:

Originally Posted by pizzamaker

good job

Those ez outs, aren't very easy out when they break off. That's some hard metal. Dremels are great for this kind of stuff. Good work. Anyone that's had to remove those, knows how tough they can be

07-17-2009, 06:35 PM	#1
shorepatrol Not Yet Wild Join Date: Jul 2009 Location: Arizona Posts: 23	Snapped off driven clutch bolt update Ended up snapping off an EZ OUT in the shaft After a half an hour and two dremel grinder bits I had it cleaned out enough to run a tap through it and install a factory bolt. Sharp drill bits and a dremel save the day.

Similar Threads
Thread	Forum
Lift kit spring U Bolt snapped-can you get grade 8?	Gas Club Car
Driven clutch retaining bolt snapped off	Gas EZGO
96 DS stock drive clutch bolt size (exterior bolt)	Gas Club Car
88 cc threads in clutch bolt	Gas Club Car
trouble getting clutch bolt out	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum