Which Cab Enclosure?

eng208 · 10-25-2007, 11:03 PM

Hey, I have been asked to purchase a cab enclosure for my in-laws late 90s EZ Go which has a small bed on the back that does not tilt. It is a gas. I also want to get one for my family's new to us 01 ST 1200 Workhorse, with the tilt bed. Not really interested in the tilt feature while the cover is on it. Where would the best place to buy a basic enclosure be? I have looked on ebay, but everything is for a 2 person only, and I don't know if it will fit. I would like some experience and ideas from you guys. Just trying to ward off the cold wind this winter.
Thanks
Eng208

NO NO NO E-Z-GO! · 10-25-2007, 11:11 PM

Northern Tool has covers for carts with extended tops. That is probably as close as you will get to what you need.

TheNewGuy · 10-26-2007, 08:56 AM

http://www.northerntool.com/webapp/w...t_6970_799_799

Woodie1976 · 10-26-2007, 09:41 AM

my thoughts are if ya cant find one anywhere that will fit your needs.... i would say break out the sewing machine and make one.... if you have a upholstery shop around they might be more than tickled to help make one for you to your "custom" specs...... i know thats what i'm thinking about doing is just building my own so that way i know its going to fit 100% all the time

ruredy · 10-26-2007, 11:55 AM

I would at least ask your local ezgo dealer about them, They have those for the workhorse carts as well as the other carts. you might be surprized.

eng208 · 10-26-2007, 07:47 PM

Thanks, I like the one from Northern and that is about what I would pay for one. They have a Northern store about 60 miles from my home. I just don't know if they will fit the EZGo with the box on back or my Workhorse.
Eng208

doughboy43 · 10-27-2007, 03:52 PM

I have used covers similar to the Northern ones and have found that they fit reasonably well from the seat forward. From the seat back on the workhorse I let the rear portion hang between the seat and the bed. To get this to fit I raised the bed and rolled the extra legnth up to where it wouldn't lay on the engine(I tied it in a roll)and carefully lowered the bed. On the cart with the bed the extra will just lay in the bed instead of covering it like it would if there were a seat there. I have a propane heater and drive mine all winter and stay very warm. Hope this info helps. Eric

eng208 · 10-28-2007, 05:52 PM

This is what I needed to know. Thank you. I didn't want to go buy two enclosures and neither one of them fit. That would be bad.
Thanks,
Eng208

10-25-2007, 11:03 PM	#1
eng208 Not Yet Wild Join Date: Oct 2007 Posts: 5	Which Cab Enclosure? Hey, I have been asked to purchase a cab enclosure for my in-laws late 90s EZ Go which has a small bed on the back that does not tilt. It is a gas. I also want to get one for my family's new to us 01 ST 1200 Workhorse, with the tilt bed. Not really interested in the tilt feature while the cover is on it. Where would the best place to buy a basic enclosure be? I have looked on ebay, but everything is for a 2 person only, and I don't know if it will fit. I would like some experience and ideas from you guys. Just trying to ward off the cold wind this winter. Thanks Eng208
eng208 Not Yet Wild Join Date: Oct 2007 Posts: 5

10-25-2007, 11:11 PM	#2
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 5,081	Re: Which Cab Enclosure? Northern Tool has covers for carts with extended tops. That is probably as close as you will get to what you need.

10-26-2007, 08:56 AM	#3
TheNewGuy Site Moderator Join Date: Dec 2006 Location: Ohio Posts: 5,606	Re: Which Cab Enclosure? http://www.northerntool.com/webapp/w...t_6970_799_799
	Ron If you can't run with the BIG DOGS...stay on the porch Please Visit Our Sponsors TheBadBoyG9 * Frame Mod * New Exhaust Marathon Project

10-26-2007, 09:41 AM	#4
Woodie1976 A Wooden Pine Cone Join Date: Aug 2007 Location: Iowa about 15 mins from the feild of dreams Posts: 671	Re: Which Cab Enclosure? my thoughts are if ya cant find one anywhere that will fit your needs.... i would say break out the sewing machine and make one.... if you have a upholstery shop around they might be more than tickled to help make one for you to your "custom" specs...... i know thats what i'm thinking about doing is just building my own so that way i know its going to fit 100% all the time

10-26-2007, 11:55 AM	#5
ruredy Born Wild Join Date: Mar 2007 Location: South Carolina Posts: 2,205	Re: Which Cab Enclosure? I would at least ask your local ezgo dealer about them, They have those for the workhorse carts as well as the other carts. you might be surprized.

10-26-2007, 07:47 PM	#6
eng208 Not Yet Wild Join Date: Oct 2007 Posts: 5	Re: Which Cab Enclosure? Thanks, I like the one from Northern and that is about what I would pay for one. They have a Northern store about 60 miles from my home. I just don't know if they will fit the EZGo with the box on back or my Workhorse. Eng208
eng208 Not Yet Wild Join Date: Oct 2007 Posts: 5

10-27-2007, 03:52 PM	#7
doughboy43 Not Yet Wild Join Date: May 2007 Posts: 1	Re: Which Cab Enclosure? I have used covers similar to the Northern ones and have found that they fit reasonably well from the seat forward. From the seat back on the workhorse I let the rear portion hang between the seat and the bed. To get this to fit I raised the bed and rolled the extra legnth up to where it wouldn't lay on the engine(I tied it in a roll)and carefully lowered the bed. On the cart with the bed the extra will just lay in the bed instead of covering it like it would if there were a seat there. I have a propane heater and drive mine all winter and stay very warm. Hope this info helps. Eric
doughboy43 Not Yet Wild Join Date: May 2007 Posts: 1

10-28-2007, 05:52 PM	#8
eng208 Not Yet Wild Join Date: Oct 2007 Posts: 5	Re: Which Cab Enclosure? This is what I needed to know. Thank you. I didn't want to go buy two enclosures and neither one of them fit. That would be bad. Thanks, Eng208
eng208 Not Yet Wild Join Date: Oct 2007 Posts: 5

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode