08-17-2010, 08:58 PM | #1 |
Not Yet Wild
Join Date: Aug 2010
Location: Erie, Mi
Posts: 28
|
Ez Go Workhorse 800g
I just got this workhorse,and was told it will not turn over. I read in 1 of Buggies Gone Wild threads how to check it out and the engine will turn over. After I removed the the spark plugs. The plug are miss match, What plugs does it take. They have the long threads.There is a missing Serial Number plate under the right glove box. http://www.buggiesgonewild.com/images/smilies/help.gif
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-17-2010, 09:00 PM | #2 |
Not Yet Wild
Join Date: Aug 2010
Location: Erie, Mi
Posts: 28
|
Re: Ez Go Workhorse 800g
Also the brakes are lock up, Best place to start????
|
08-18-2010, 11:21 AM | #3 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: Ez Go Workhorse 800g
I run NGK BRP4ES in them. You can also run a NGK BRP5ES plug.
brakes, can be wither the pads are worn, drums rusted to pads, or the cables are internally rusted and need replacing. I see this every day. |
08-19-2010, 01:26 AM | #4 |
Not Yet Wild
Join Date: Aug 2010
Location: Erie, Mi
Posts: 28
|
Re: Ez Go Workhorse 800g
By the pic what engine is this? Or what year?
|
08-19-2010, 06:57 AM | #5 |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: Ez Go Workhorse 800g
Can't tell by the pic but it should have come from the factory with the 350 (11 hp) engine,look at the tag on the black plastic panel between the carb & block and if it has EH 35 it's a 350 but if it has EH 29 it's a 290 (9 hp).Also be sure you never run it without a clean air filter & complete air box (I see the top is missing off of it in the pic) because dirt & dust will eat the valves & rings up quickly.As far as the year model look at the plate inside the right glove box.
|
08-20-2010, 06:08 PM | #6 |
Not Yet Wild
Join Date: Aug 2010
Location: Erie, Mi
Posts: 28
|
Re: Ez Go Workhorse 800g
There is a black plate by carb it has a Robin RH29c Made in Japan PP-T40 By Fuji. and a Engine family SF-2952G2RA,
With a emission tag for California 95-98 So to say it is a 295cc |
08-20-2010, 08:01 PM | #7 |
Gone Wild
Join Date: Aug 2009
Location: Santuck,Al
Posts: 1,747
|
Re: Ez Go Workhorse 800g
Yes sir to the best of my knowledge that makes it a 295,there should also be a plate (tag) mounted inside the left glove box (in addition to the one in the right glove box) that has load capacity & engine size that it came from the factory with.
|
08-20-2010, 11:43 PM | #8 |
Not Yet Wild
Join Date: Aug 2010
Location: Erie, Mi
Posts: 28
|
Re: Ez Go Workhorse 800g
Ya that plate is missing, Look the under frame over did not find any ### there ether.
|
08-23-2010, 08:17 PM | #9 |
Not Yet Wild
Join Date: Aug 2010
Location: Erie, Mi
Posts: 28
|
Re: Ez Go Workhorse 800g
I found this engine manual for it EZ Go Engine 27615-g01
|
08-24-2010, 07:24 PM | #10 |
DELETED
Join Date: Mar 2008
Posts: 1,025
|
Re: Ez Go Workhorse 800g
Hey Junky ... Quick before you get started .. sell the cart and run away very very fast. Don't
look back ... If that doesn't sound like you, ok then. Welcome to the Asylum ..... but don't say you weren't warned ..... There should be a set of numbers stamped into the frame-rail above the rear passenger side wheelwell/fender ... copy them down, go here Serial # ID and put in what you got ... and the program should ID it for you ..... , , |
Tags |
what engine is this? |
|
|
Similar Threads | ||||
Thread | Forum | |||
1999 workhorse 1200 or 2006 workhorse 800, which one? | Gas EZGO | |||
99 ez=go 800g truck clutch problem | Gas EZGO | |||
Workhorse 800G age & body | Gas EZGO | |||
Work Horse 2000 800G Coil | Gas EZGO | |||
EZGO 2000 - 800G,, Low speed jerking | Gas EZGO |