|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-20-2010, 01:30 AM | #1 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
repaired my 1985 drive clutch
I repaired my old drive clutch. It was missing all of the buttons. I JB welded head gasket material strips to cover the area the buttons slide on and round head gasket circles JB welded to the button area about 9/16 in diameter I inserted a cellofane piece to keep the two parts from welding together in case I had a little JB on the faces. I let it set up 24 hours. found it was a little tight and would stick when engaging, so i filed the rough spots and fit each one a little at a timeuntilit engaged smoothly then coated them with teflon spray. I installed it and it works great. I don't know the life expectancy but head gasket material is tough and layered with metal, and a asbestos or grafite naterial which is really skich like teflon. wish me luck. I,m an old time mechanic and I am reluctant to replace parts when repair is feasable. I rebuild starters alternators , generators and most mechanical parts
Thanks to JB Weld, what a great product I have fixed leaky aluminum A/C pressure lines. and radiators and coolers . I also Jb Welded a loose intake valve seat in my John Deere 318. I guess they run hotter on unleaded and come loose and travel with the valve wearing a bigger hole. so normally you bore it and put an oversized seat in, instead I filed notches parallel around the edge of the valve seat and etched the edge in the block where the seat fits and JB welded it in and re-install the valve and spring, give irt 48 hours and put all together and its been running great all summer. it may not last forever but saved a complete tear down, a machine bill and valve job. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-12-2011, 09:26 AM | #2 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: repaired my 1985 drive clutch
April 2011 clutch still works great still almost 2 years now
|
04-12-2011, 12:06 PM | #3 |
Not Yet Wild
Join Date: Apr 2011
Location: Cape Breton, Nova Scotia
Posts: 5
|
Re: repaired my 1985 drive clutch
you may need to redo this repair on your cart after reading your new post. Hope it works out for you again! Gotta love JB Weld!!
|
04-12-2011, 01:23 PM | #4 |
Getting Wild
Join Date: Jul 2010
Location: Ohio
Posts: 93
|
Re: repaired my 1985 drive clutch
Can you give more detail on how you got the cover off to expose the inards?
|
04-12-2011, 04:46 PM | #5 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: repaired my 1985 drive clutch
My clutch has bolts maybe yous does not?
|
04-13-2011, 03:52 AM | #6 |
Getting Wild
Join Date: Jul 2010
Location: Ohio
Posts: 93
|
Re: repaired my 1985 drive clutch
Mine has 6 or 8 bolts, can't remember, that holds the center spider to the outer cover/bell and the center bolt holds the clutch to the crank.
I didn't try real hard to get the cover off because it was bending so I just threw it back together and went with it. Mine is a stock ezgo, not a comet replacement.... |
04-13-2011, 12:05 PM | #7 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: repaired my 1985 drive clutch
I think mine had six, and I think it came apart ok you might have to make shure you take it off evenly. its a pretty simple mechanism inside
|
04-13-2011, 12:13 PM | #8 |
Getting Wild
Join Date: Jul 2010
Location: Ohio
Posts: 93
|
Re: repaired my 1985 drive clutch
Thanks
I'll give it another go this weekend. |
04-13-2011, 12:47 PM | #9 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: repaired my 1985 drive clutch
Good luck, I wish I would have taken pictures when I did mine. If I can help shout, God Bless
|
05-11-2013, 07:16 PM | #10 |
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: repaired my 1985 drive clutch
repaired my clutch May 2009 still going strong 4 years now
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Drive Clutch removal 1985 EZGO | Gas EZGO | |||
1985 ezgo clutch removal | Gas EZGO | |||
WTB G1 Drive clutch | Golf Carts and Parts | |||
I think I need a new drive clutch??? | Gas EZGO | |||
Hairline crack in block, can it be repaired? | Gas EZGO |