lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-12-2010, 12:04 PM   #1
Not Yet Wild
 
cart newbee's Avatar
E-Z-GO
 
Join Date: Sep 2010
Location: Sikeston, MO
Posts: 33
Default setting pulsar coil ?

I know that the pulsar coil is held down by two screws on a ring with sloted holes to alow adjustments. here are my questions ( '83 244cc two stroke )
1) what is the gap setting ?
2) is the gap set to the crank or to the magnet on flywheel ?
3) if it is set to flywheel, how do you see to adjust ?
I'm new to the cart world and i know these may be stupid questions but i can't find any info on setting this part. Thanks for any help you can offer.
cart newbee is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-12-2010, 01:10 PM   #2
Hammer Down !!!!
 
BrewCityMusic's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
Default Re: setting pulsar coil ?

I believe the gap is going to be fine no matter where you set the ring, turning the ring adjusts the spark timing (not the actual gap for the pulsar). Mine is set right smack in the middle of the slots and works just fine, turning the ring counterclockwise should advance your spark and clockwise retards it - make sure if you're going to mess with it though that you check your running in both forward and reverse though, as these motors run backwards in reverse so if you advance the spark one way it'll retard it the other, you need to find that balance where it runs good in both directions.
BrewCityMusic is offline   Reply With Quote
Unread 09-13-2010, 06:37 AM   #3
Not Yet Wild
 
cart newbee's Avatar
E-Z-GO
 
Join Date: Sep 2010
Location: Sikeston, MO
Posts: 33
Default Re: setting pulsar coil ?

Thanks. Ithought it was more like points, but i guess it is more like a trigger for the spark. Like i said, it was a dumb question.
cart newbee is offline   Reply With Quote
Unread 09-14-2010, 01:51 PM   #4
Hammer Down !!!!
 
BrewCityMusic's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
Default Re: setting pulsar coil ?

there ARE no dumb questions with these things - a lot of stuff "looks" normal but really isn't, so it's always good to ask first and save yourself a ton of headaches, I've found!
BrewCityMusic is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Pulsar coil testing high Gas EZGO
Pulsar Coil and Ignitor Gas EZGO
Pulsar coil Gas EZGO
Pulsar coil location Gas EZGO
pulsar coil needed Gas EZGO


All times are GMT -5. The time now is 06:36 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.