|
12-24-2010, 10:16 AM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2010
Posts: 41
|
Backfire
Just rebuilt my robin 295 cc but i can't get it to start. I have fire , but it will not start? All it will do is backfire.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-24-2010, 10:31 AM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Ohio
Posts: 1,143
|
Re: Backfire
Maybe check the timing...
 |
|
|
|
|
12-24-2010, 10:33 AM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Backfire
Valve adjustments and then timing?
|
|
|
|
|
12-24-2010, 11:04 AM
|
#4 |
|
Not Yet Wild
Join Date: Dec 2010
Posts: 41
|
Re: Backfire
Is there a easy way to ck timing?
|
|
|
|
|
12-24-2010, 11:08 AM
|
#5 |
|
Gone Wild
Join Date: Apr 2010
Location: Interlachen,Fl
Posts: 326
|
Re: Backfire
the only way to check your timing is to pull the timing belt cover and lineup the marks.
|
|
|
|
|
12-24-2010, 11:14 AM
|
#6 |
|
Not Yet Wild
Join Date: Dec 2010
Posts: 41
|
Re: Backfire
If the marks r right could it b 180% off?
|
|
|
|
|
12-24-2010, 11:18 AM
|
#7 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Backfire
I have heard they will run if they are off as much a 3 teeth.... Pull the valve cover and do that valve adjustment. If the timing is way off the valves won't be near closed at TDC.
|
|
|
|
|
12-25-2010, 08:28 AM
|
#8 |
|
Getting Wild
Join Date: Apr 2010
Location: los angeles
Posts: 126
|
Re: Backfire
And/or clean the carburetor.
|
|
|
|
|
12-25-2010, 02:31 PM
|
#9 |
|
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: Backfire
TCS you do not have to pull the cover... It will run a tooth off.. Do like Scotty says, and check the valves. If they are closed at TDC then the timing is close enough. If you are way off the valves will show it under TDC.... The carb. should not be causing a backfire in your situation. When you put it back together did you make sure the timing marks were lined up on the cam and crank properly? If you can't remember then you should start there.
|
|
|
|
|
12-27-2010, 10:11 AM
|
#10 |
|
Not Yet Wild
Join Date: Dec 2010
Posts: 41
|
Re: Backfire
Thanks everyone! The valve adj did the job. Starts right up and best of all no backfire!
 |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Backfire??? | Gas EZGO | |||
| Backfire | Gas Club Car | |||
| '89 G2 backfire | Gas Yamaha | |||
| backfire? | Gas Club Car | |||
| Backfire Help???? | Gas Yamaha | |||
Linear Mode
