micro switches

puller · 04-17-2008, 08:35 PM

Can the micro switches on the forward and reverse lever be adjusted?
It's on my 90 marathon.When looking from the passenger side when you put it in reverse it looks like the switch should go into a little indention but doesn't.This is looking from the back.

Ritchie

scottyb · 04-17-2008, 10:12 PM

Puller, the micro switch is similar to the light switch on the wall. It is either on or off...Check it for function with a volt meter. If it is not coming on or off then you can adjust or tweek the metal spring arm if needed or replace it if you can't make it work. Hope this helps....

puller · 04-17-2008, 10:15 PM

thanks

04-17-2008, 08:35 PM	#1
puller Getting Wild Join Date: Oct 2007 Location: out in New Mexico & yes it's in the U.S.A. Posts: 103	micro switches Can the micro switches on the forward and reverse lever be adjusted? It's on my 90 marathon.When looking from the passenger side when you put it in reverse it looks like the switch should go into a little indention but doesn't.This is looking from the back. Ritchie

04-17-2008, 10:12 PM	#2
scottyb lug nutz Join Date: Dec 2007 Location: So Cal Posts: 6,129	Re: micro switches Puller, the micro switch is similar to the light switch on the wall. It is either on or off...Check it for function with a volt meter. If it is not coming on or off then you can adjust or tweek the metal spring arm if needed or replace it if you can't make it work. Hope this helps....

04-17-2008, 10:15 PM	#3
puller Getting Wild Join Date: Oct 2007 Location: out in New Mexico & yes it's in the U.S.A. Posts: 103	Re: micro switches thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Can The Micro Switch Short Out?	Gas Yamaha
micro switch	Electric EZGO
Micro switches	Gas Club Car