Which workhorse seat is which

reinman88

My workhorse is a 99 gas 800 series, but has had some changes over time, like a 350 engine instead of the 295, and I'm thinking another change may be the seat. I've seen some where the seat is one piece and the back flips up as well at the seat itself. Also on some that are the age of my cart, the top supports at the back appear to be on the outside edge of the cart.

I'm thinking of getting a top, so I'll need to be sure what I have. In my case I do not have a one piece seat, instead the bottom just flips up. Also if I was to add supports for the top, they'd attach to the back of the seat at the back seat supports.

I've been told my seat has probably been replaced somewhere along the line, and I now have the newer style seat, which would be 2004 or later. I've looked at the manual in the tech section, and the picture they show of the supports are not like mine, they are near the outside of the cart, and don't attach to the seat.

When I see pictures of newer carts, they appear to have the support arms that attach to the seat supports. Though I'm wondering if the newer workhorse is different from the newer standard TXT cart. The workhorse has the dump bed to worry about, so I thought the supports may have an extra bend in them somewhere to account for that.

Anybody have any ideas?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

bbeckwor

Same seat.